The Fusion® Starter Kit is an all-inclusive, low-cost evaluation kit for the Actel Fusion™ family. Explore the various benefits of the mixed-signal Fusion PSCs, including ISP, device serialization, and FlashLock® on-chip system security. [mehr]
IGLOO PLUS Starter Kit
The low-cost IGLOO PLUS Starter Kit features the IGLOO PLUS family of low-power FPGAs, which offer the industry´s best power-, area-, logic- and feature-per-I/O ratios in a programmable device. [mehr]
"Taihu" 405EP Evaluation Kit
The AMCC 405EP evaluation kit provides users with a comprehensive set of resources to evaluate the 405EP processor as well as to start system development. [mehr]
"Yosemite" PPC 440EP Evaluation Kit
The AMCC 440EP evaluation kit provides users with a comprehensive set of resources to evaluate the 440EP processor as well as to start their system development. [mehr]
"Yellowstone" PPC 440GR Evaluation Kit
The AMCC 440GR evaluation kit provides users with a comprehensive set of resources to evaluate the 440GR processor as well as to start their system development. [mehr]
"Sequoia" PowerPC 440EPx Evaluation Kit
The AMCC 440EPx evaluation kit provides users with a comprehensive set of resources to evaluate the 440EPx processor as well as to start system development. [mehr]
"Acadia" PowerPC 405EZ Evaluation Kit
The AMCC 405EZ evaluation kit provides users with a comprehensive set of resources to evaluate the 405EZ processor as well as to start system development. [mehr]
"Rainier" PowerPC 440GRx Evaluation Kit
Enables comprehensive evaluation of the AMCC 440GRx processor, while minimizing customers´ hardware and software development time. [mehr]
"Taishan" PowerPC 440GX Evaluation Kit
Enables comprehensive evaluation of the AMCC 440GX processor, while minimizing customers´ hardware and software development time. The AMCC 440GX evaluation kit provides users with a comprehensive set of resources to evaluate the 440GX processor as well as to start system development. [mehr]
"Katmai" PowerPC 440SPe Evaluation Kit
Enables comprehensive evaluation of the AMCC 440SPe processor, while accelerating customers´ hardware and software development time. The AMCC 440SPe evaluation kit provides users with a comprehensive set of resources to evaluate the 440SPe processor as well as to start system development. [mehr]
"Haleakala" EV-405EXr-KIT-01
The AMCC Haleakala evaluation kit provides users with a comprehensive set of resources to evaluate the 405EXr processor as well as to start system development. [mehr]
"Kilauea" EV-405EX-KIT-02
Enables comprehensive evaluation of the AMCC 405EX processor, while accelerating customers´ hardware and software development time. [mehr]
"Canyonlands" EV-460EX-KIT-01
PowerPC 460EX Evaluation Kit Enables comprehensive evaluation of the AMCC 460EX processor, while accelerating customers´ hardware and software development time. [mehr]
"Glacier" EV-460GT-KIT-01
PowerPC 460GT Evaluation Kit Enables comprehensive evaluation of the AMCC 460GT processor, while accelerating customers´ hardware and software development time. [mehr]
AT91RM9200-EK Evaluation Board
Das AT91RM9200-EK Evaluation Board ermöglicht Entwicklung und Evaluierung von Echtzeit-Code . Es unterstützt den auf ARM9™-basierenden 32-bit RISC Prozessor AT91RM9200. [mehr]
AT91SAM7A3-EK (Evaluation Board)
Das AT91SAM7A3 hat einen 54 MIPS ARM7TDMI Prozessor mit 256K Bytes high-speed Flash, 32K bytes SRAM und einem reichhaltigen Satz an Peripherie inklusive zwei CAN Controller (2.0A und 2.0B Full CAN), USB 2.0, 8-Kanal 20-bit Pulsbreiten-Modulation, zwei 8-Kanal 10-bit ADC und einem kompletten Satz an Systemfunktionen, die die Anzahl der benötigten externen Komponenten minimiert. Es stellt eine leistungsfähige, kosteneffektive Lösung dar für viele rechenintensive embedded Control Anwendungen in der automobilen und industriellen Welt. [mehr]
AT91SAM7S-EK (Evaluation Kit)
Das AT91SAM7S-EK Evaluation Kit ermöglicht Evaluierung und Entwicklung von Programmcode für Applikationen, die auf einem AT91SAM7S laufen. Das Board ist ausgestattet mit einem AT91SAM7S64 (PQFP 64 Gehäuse). Das Evaluation Board kann auch mit einem AT91SAM7S128 oder einem AT91SAM7S256 Bauteil geliefert werden (vollständig kompatibel mit AT91SAM7S64). [mehr]
AT91SAM7X-EK Evaluation Board
Das AT91SAM7X-EK Evaluation Kit ermöglicht Evaluierung und Entwicklung von Programmcode für Applikationen, die auf einem AT91SAM7X256/128 laufen. Das Board ist ausgestattet mit einem AT91SAM7X256 (100-pin LQFP "grünes" Gehäuse) zusammen mit einer grossen Vielfalt an Schnittstellen. [mehr]
AT91SAM7SE-EK Evaluation Kit
Das AT91SAM7SE-EK Evaluation Kit ermöglicht Evaluierung und Entwicklung von Programmcode für Applikationen, die auf einemAT91SAM7SE laufen. [mehr]
AT91SAM9261-EK Evaluation Board
Das AT91SAM9261-EK Evaluation Kit ist eine effektive Plattform zur Evaluierung der Chip-Leistungsfähigkeit und zur Code-Entwicklung für Applikationen basierend auf dem AT91SAM9261. [mehr]
AT91SAM9260-EK Evaluation Kit
Das AT91SAM9260-EK Evaluation Kit ermöglicht Evaluierung und Entwicklung von Programmcode für Applikationen basierend auf einemAT91SAM9260. Das Board unterstützt den AT91SAM9260 im LFBGA217 Gehäuse und auch in einem PQFP208 Gehäuse. [mehr]
AVR Dragon
Das AVR Dragon setzt einen neuen Standard für billige Entwicklungstools. AVR Dragon unterstützt alle Programmiermodi für die AVR Bauteile Familie. [mehr]
AVR STK500 Starter Kit
Das Atmel AVR STK500 ist ein Starter Kit und Entwicklungssystem für Atmels AVR Flash Mikrocontroller. Das STK500 ermöglicht Entwicklern einen schnellen Start, um Code auf dem AVR zu entwickeln, kombiniert mit Funktionen zum Entwickeln von Prototypen und Testen von neuen Designs.Das STK500 arbeitet mit AVR Studio zusammen, Atmels integrierter Entwicklungsumgebung für Programmentwicklung und Debugging. Erweiterungskarten sind für die verschiedenen AVR Unterfamilien und grösseren Bauteilen verfügbar. [mehr]
ATAVRFBKIT Ballast Demo Kit
Das ATAVRFBKIT ist ein Kit für ein dimmbares Leuchtstoffröhren-Vorschaltgerät, das die Fähigkeiten des AT90PWM2 demonstriert, alle wichtigen Funktionen eines DALI Vorschaltgeräts für Leuchtstoffröhren zu steuern. Mitgelieferter C Code beschleunigt die Entwicklungszeit. [mehr]
STK525 USB Starter Kit
Das STK525 Starter Kit ist zugeschnitten auf den AT90USB Mikrocontroller. Es unterstützt JTAGICE mkII und AVRISP mkII mittels AVR Studio. Es enthält eine Anzahl von Beispielprogrammen mit Source und Hex-Files. Das Programmieren der Bauteile kann direkt über den USB Port mit FLIP In-System Dienstprogrammen vorgenommen werden. [mehr]
SAM3U- EK Evaluation Kit
The SAM3U Evaluation Kit (SAM3U-EK) allows the evaluation of the SAM3U series devices. It has enough features to demonstrate most of the product’s capabilities to the users. The SAM3U-EK also features extension connectors to allow the users to add new interfaces in case they are not on-board. [mehr]
ATNGW100 Network Gateway Kit
Dieses Atmel AVR32 Kit basiert auf dem AT32AP7000 Applikations-Prozessor und ist gut geeignet als eine preiswerte Alternative zu STK1000. Das Board besitzt diverse Peripheriefunktionen und viele lizenzfreie Peripherie-Treiber, Protokoll- Stacks und Kommunikations-Applikationen. Das NetworkGateway Kit demonstriert die Fähigkeiten des AVR32 und dessen embedded Linux Kernels, high-speed serielle Kommunikation zu bewältigen inklusive Brücken bilden zwischen Interfaces, auf denen inkompatible serielle Protokolle laufen. Beispiele sind Verkehr zwischen zwei TCP/IP Netzwerkezu routen und filtern oder auch für Daten zwischen TCP/IP, USB und SD Karten. [mehr]
EVK1100 Evaluation Kit
Das EVK1100 ist ein Evaluierungskit und Entwicklungssystem für den AVR32 AT32UC3A Mikrocontroller. Es ist mit einem reichhaltigen Satz an Peripherie und Speicher bestückt und macht es leicht, das volle Potential der AVR32 Bauteile auszutesten. [mehr]
AT91SAM9263-EK Evaluation Kit
Das AT91SAM9263-EK Evaluation Kit bietet Evaluierung und Code-Entwicklung für Applikationen, die auf einem AT91SAM9263 Bauteil laufen. Das Board ist mit einem AT91SAM9263 (324-ball LFBGA Gehäuse) bestückt. [mehr]
AVR USB Key Demonstration Kit
Das AT90USBKey ist ein preisgünstiges Demonstrationsboard basierend auf dem AT90USB1287 Mikrocontroller. Es ermöglicht die schnelle Evaluierung von AVR Mikrocontrollern und der AT90USB Familie. Das AT90USBKey wird einfach mit dem USB Port eines PC verbunden und schon kann man die darauf enthaltene Dokumentation abrufen und AVR Programme ausführen. Entwickler können entweder Demo-Programme oder ihre eigenen Anwendungen laufen lassen. [mehr]
ATEVK1101 Evaluation Kit
<p>Das EVK1101 ist ein Evaluierungskit und Entwicklungssystem für den AVR32 AT32UC3B Mikrocontroller.<br />Es ist mit einem reichhaltigen Satz an Peripherie und Speicher bestückt und macht es leicht, das volle Potential der AVR32 Bauteile auszutesten. </p> <ul> <li>Unterstützt den AT32UC3B</li> <li>Sensoren: Licht, Temperatur</li> <li>Steckverbindungen für JTAG, Nexus, USART, USB 2.0, TWI, SPI</li> <li>SD und MMC Kartenleser</li> </ul>Das EVK1101 ist ein Evaluierungskit und Entwicklungssystem für den AVR32 AT32UC3B Mikrocontroller. Es ist mit einem reichhaltigen Satz an Peripherie und Speicher bestückt und macht es leicht, das volle Potential der AVR32 Bauteile auszutesten. [mehr]
ATAVRAUTOEK1 Evaluation Kit
Das ATAVRAUTOEK1 Evaluation Kit ist ein komplettes und sofort nutzbares CAN/LIN Netzwerk mit einem CAN-LIN Gateway (AUTO100) und zwei LIN Slave Knoten. Ein Knoten wird für die Steuerung eines Joysticks genutzt (AUTO300) und ein Knoten für einen DC Motor (AUTO200). Es bietet auch einen CAN/LIN Netzwerk Debugger (AUTO102), der über USB mit einem PC verbunden wird und das Überwachen und Senden auf beiden Netzwerken mittels Warwick Technology PC Software ermöglicht. Damit kann der Kunde sofortstarten und Atmel´s Netzwerklösungen für Automotive ausprobieren. [mehr]
AT91SAM9RL-EK Evaluation Kit
Das AT91SAM9RL-EK Evaluation Kit unterstützt die AT91SAM9RL ARM926EJ-S-basierenden 32-bit RISC Mikrocontroller für Echtzeit-Programmcode Entwicklung und Evaluierung. [mehr]
AT91SAM9XE-EK Evaluation Kit
Das AT91SAM9XE-EK Evaluation Kit bietet Evaluierung und Code-Entwicklung für Applikationen, die auf einem AT91SAM9XE Bauteil laufen. [mehr]
ATAVRRZRAVEN 2.4 GHz Evaluation und Starter Kit
Das RZRAVEN 2.4 GHz Evaluations- und Starter-Kit ermöglicht Entwicklung, Debugging und Demonstration von vielen drahtlosen Applikationen mit geringer Leistungsaufnahme inklusive IEEE 802.15.4, 6LoWPAN und ZigBee Netzwerken. [mehr]
AVR® STK600 Starter Kit
Das Atmel AVR® STK600 ist ein komplettes Starterkit und Entwicklungssystem für die AVR und AVR32 Flash Mikrocontroller von ATMEL Corporation. Damit kann der Entwickler schnell mit der Codeentwicklung für AVR starten, mit seinen fortschrittlichen Funktionen kann das Starterkit aber auch als Prototyp und Testen von neuen Designs verwendet werden. STK600 wird mit einem ATmega2560 Board geliefert. [mehr]
AT91SAM9G20-EK Evaluation Kit
Das AT91SAM9G20-EK Evaluation Kit unterstützt die AT91SAM9G20 ARM926EJ-S-basierenden 32-bit RISC Mikrocontroller für Echtzeit-Programmcode Entwicklung und Evaluierung. [mehr]
AT91SAM7L-STK Starter Kit
Das AT91SAM7L-STK Starter Kit bietet Evaluierungsmöglichkeiten und Code Entwicklung für Applikationen, die auf einem AT91SAM7L64/128 Mikrocontroller laufen. [mehr]
AT91EB40A Evaluation Kit
Das AT91EB40A Evaluation Kit unterstützt den AT91R40008 und ermöglicht Entwicklung von Echtzeit-Programmen und Evaluierung. [mehr]
AT91EB42 Evaluation Kit
Das AT91EB42 Evaluation Kit unterstützt den AT91M42800A und ermöglicht Entwicklung von Echtzeit-Programmen und Evaluierung. [mehr]
AT91EB55 Evaluation Kit
Das AT91EB55 Evaluation Kit erlaubt schnelle Evaluierung und Applikationsentwicklung auf dem AT91M55800A. [mehr]
AT91SAM9G10-EK Evaluation Kit
Das AT91SAM9G10-EK Evaluation Kit ist eine effektive Plattform zum Evaluieren der Chip Leistung und zum Entwickeln von Code für Applikationen mit dem AT91SAM9G10. [mehr]
AT91CAP9 Starter Kit
Das AT91CAP9 Starter Kit wird mit einem für einen sofortigen Start notwendigen Satz an Entwicklungswerkzeugen geliefert.
Dies enthält:
KickStart Version von IAR™ Embedded Workbench® für ARM®
Microsoft® Windows CE ® Board Support Package und Demo von Adeneo
Instruktionen zum Herunterladen von Altera´s kostenlosen Quartus® 2 Web Edition Tools für die FPGA Programmierung
Xplain ist ein leicht zu benutzendes Evaluierungs- und Demonstrations-Kit für ATxmega128A1. Es bietet die komplette Hardware zum Evaluieren der sehr genauen Analogfunktionen des Bauteils. [mehr]
ATQT600
Das Atmel QT600 ist ein komplettes Touch Entwicklungskit für Tasten, Schieberegler und Drehregler. [mehr]
SAM3S Evaluation Kit
The SAM3S Evaluation Kit (SAM3S-EK) enables evaluation capabilities and code development of applications running on a SAM3S4C device. [mehr]
EVAL-BF5xx - Blackfin Evaluation Board
The EVAL-BF5xx Blackfin Evaluation Board is designed for evaluating all Blackfin Core Modules and provides flexible interfaces user specific extensions. Besides connectors for all Core Module pins the EVAL-BF5xx Evaluation Board contains a SD-Card connector, CAN transceiver, USB and CAN Interface connectors.
The DEV-BF5xxDA-Lite Development Board with integrated Debug Agent is designed for evaluating and programming Blackfin based Core Modules from Bluetechnix. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Modules.The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on topof the Development Board in order to enable additional interfaces. All Blackfin Core Modules have compatible connectors and can be replaced with each other. [mehr]
DEV-BF548-Lite - Blackfin Development Board
The DEV-BF548-Lite Development Board is designed as development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to provide additional interfaces. [mehr]
DEV-BF548DA-Lite - Blackfin Development Board
The DEV-BF548DA-Lite Development Board with integrated Debug Agent is designed as a development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development board provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to enable additional interfaces. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Modules. [mehr]
EXT-BF548-EXP- Blackfin Development Board
The EXT-BF548-EXP Extender Board is an extender plug-on board for the DEV-BF548-Lite or the DEV-BF548DA-Lite Board to evaluate the CM-BF548 Core Modules. All connector pins of the expansion connector are available as solderable pads to facilitate the interconnection of cables or peripheral modules. An additional RS232 serial converter and respective connector is available as well. [mehr]
CM-BF537E Blackfin Starter Package
The Blackfin Starter Package is a low cost development package consisting of a DEV-BF5xxDA-Lite Development Board and a CM-BF537 Core Module. The DEV-BF5xxDA-Lite Board includes an on-board Debug Agent (USB JTAG) and enables programming and debugging Bluetechnix´ Blackfin Core Modules. [mehr]
CM-BF548 Blackfin Starter Package
The DEV-BF548DA-Lite Development Board with integrated Debug Agent is designed as a development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to enable additional interfaces. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Module. [mehr]
CM-BF527 Blackfin Starter Package
The Blackfin Starter Package is a low cost development package consisting of a DEV-BF5xxDA-Lite Development Board and a CM-BF527 Core Module. The DEV-BF5xxDA-Lite Board includes an on board Debug Agent (USB JTAG) and enables programming and debugging Bluetechnix´ Blackfin Core Modules. [mehr]
Freescale DEV-i.MX27 Development Package
The DEV-i.MX27 Development Package is an extendable development platform for the application development with Freescale´s i.MX27 processor. The combination of the Development Board with the CM-i.MX27C can be used as a reference design for low power mobile handheld devices. Extender boards can be plugged on top of the Development Board to provide additional interfaces. [mehr]
Freescale DEV-i.MX35 Development Package
The DEV-i.MX35 Development Package is an extendable development platform for the application development with Freescale´s i.MX35 processor. The combination of the Development Board with the CM-i.MX35C can be used as a reference design for low power mobile hand held devices. Extender boards can be plugged on top of the Development Board to provide additional interfaces. [mehr]
SBC-i.MX51 Single Board Computer
The Single-Board Computer SBC-i.MX51 is based on Freescale’s high-performance i.MX51 mobile platform, incorporating an ARM Cortex-A8CPU, an Image Processing Unit (IPUv3EX) and a Video Processing Unit(VPU). The IPUv3EX provides comprehensive support for the connectivity to displays and cameras. The VPU supports hardware encoding and decoding of MPEG-4, H.263 and H.264 standards. The board‘s memory capabilities (NAND Flash, DDR2) and numerous interfaces like Ethernet, HDMI, 4xUSBand USB-OTG turn the SBC-i.MX51 into the ultimate development board for future high-end embedded devices. [mehr]
EXT-BF5xx-EXP-TR - Blackfin Development Board
The EXT-BF5xx-EXP-TR Board is an extender board that can be plugged on all Blackfin based Development and Evaluation Boards. All connector pins of the expansion connector are available as solderable pads to facilitate the interconnection of cables or peripheral modules. An additional RS232 serial converter and a respective connector is available as well. [mehr]
Embedded Serial Busses Development Kit
This kit gives users an introduction to SPI and I2C serial buses. The development kit includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12 and PIC16 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board has two nodes and shares common I/O, memory and sensor components between two PIC16 MCUs. [mehr]
Embedded Serial Busses Development Kit
This kit gives users an introduction to SPI and I2C serial buses. The development kit includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 MCU families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board has two nodes and shares common I/O, memory and sensor components between two PIC16 MCUs. [mehr]
USB DEVELOPMENT KIT
This kit enables users to begin USB interface development with Microchip´s PIC® PIC18 family. The development kit includes the powerful PCWH Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features the PIC18F4550 with an on-chip USB controller peripheral. PC software (with source) is included to communicate with the USB board. CCS provided examples include human interface applications and a high speed example emulating an oscilloscope. [mehr]
Embedded Ethernet Development kit for Microchip's ENC28J60
The Embedded Ethernet Development Kit supports development with Microchip´s ENC28J60 ethernet transceiver. This kit includes the powerful PCWH Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features a PIC18F4620 attached to a potentiometer, RS-232 level converter, push button and three LEDs. Drivers and example TCP/IP code for the ENC28J60 are included. [mehr]
CAN Bus Development Kit
Main Menu * Home * PIC MCU® C Compiler o C Aware IDE Features o Compiler Details o Device Support o Syntax and Functions o Examples Programs o C Aware Debugger o Compiler Comparison o Compiler Webinars o CCS Statistics o Cool Projects o Software Maintenance, Upgrades & User Licenses o Enhanced 8-bit Mid-Range Core * Development Kits * Programmers / Debuggers o MACH X Device Support o ICD-U64, Load-n-Go, and PRIME 8 Device Support o ICD Versions and Chip Compatibility o Connect a CCS Programmer to Your Hardware o CCS´s ICDs vs. Microchip´s ICDs o Troubleshoot Device Programmer Issues * OEM Modules * Support o Frequently Asked Questions o Customer Forums o Software Maintenance & Upgrades o Compiler Registration o Compiler Reference Manuals o Device Driver Datasheets o Books and Resources o Microchip Datasheets o www.mcuspace.com o CCS News * Downloads * Price List / Buy o Printable Price List (PDF) o Software Maintenance & Upgrades o Development Tools Selector o World [mehr]
PIC16F877A Development Kit
This development kit contains everything you need to begin development with Microchip´s PIC® PIC16877A MCU. Along with a prototyping board, it includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12 and PIC16 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features a PIC16F877A attached to a potentiometer, RS-232 level converter, pushbutton, three LEDs, and an ICD connector. [mehr]
Development Platform for CSB737 SAM9263 SOM
The KIT737, designed, developed and manufactured by Cogent Computer Systems, Inc., is a Development Platform that supports the CSB737 (Atmel SAM9263) SODIMM module as well as up to three CSB908xx series I/O Modules. Additionally, the KIT737 has a CSB909xx compatible 41-pin connector for additional LCD Display options. The KIT737 also includes: microSD Socket; I2S Codec with Headphone Amp; Dual USB to Serial UART/FIFO IC, a CPU Address/Data Expansion Header; and a 4.3" 480 x 272 LCD with touch. [mehr]
TI OMAP3530 SODIMM System On a Module
The CSB740 Single Board Computer is a highly integrated, SODIMM SOM that features a 600Mhz ARM Cortex-A8 based OMAP3530 with On-Chip LCD I/F and 2D/3D Graphics Engine, 480MBit USB Host/Device, I2S Audio I/F, Dual 4-Bit SDIO, Three UARTS and Dual SPI. Additional board features include Low Power 10/100 Ethernet Controller and On-Board 3V power supply. [mehr]
Freescale i.MX31/L SODIMM System On a Module
The CSB733 Single Board Computer is a highly integrated, SODIMM SOM that features a 532Mhz ARM1126EJ-S based i.MX31 with On-Chip LCD I/F and 2D/3D Graphics Engine, 480MBit USB Host, 480MBit USB Device, I2S Audio I/F, Dual 4-Bit SDIO, Four UARTS and Dual SPI. Additional board features include Low Power 10/100 Ethernet Controller and On-Board 3V power supply. [mehr]
Atmel AT91SAM9263 SODIMM System On a Module (SOM)
The CSB737 Single Board Computer is a highly integrated, SODIMM SOM that features a 200Mhz ARM926EJ-S based AT91SAM9263 with On-Chip LCD I/F and 2D Graphics Engine, Compact Flash I/F, USB Device, Dual USB Host, AC97 Audio I/F, 4-Bit SDIO, Four UARTS and Dual SPI. Additional board features include Low Power 10/100 PHY, 8MByte PSRAM Frame Buffer via 2nd Bus Interface and on-Board 3.3V power supply. [mehr]
LPCXpresso Value Pack
With the LPCXpresso Value Pack we have taken the next step to makeLPCXpresso development as easy as possible. Embedded Artists offers an LPCXpresso Value Pack comprising: a 10-pin to 20-pin JTAGAdapter designed to convert between the ARM mini-JTAG connector(10-pin) and the standard ARM JTAG connector (20-pin).
The LPCXpresso base board is ideal when you need to do prototyping work or when you wish to learn more about a certain microcontroller. It works with all the LPCXpresso target boards and with the mbed module. The base board is loaded with different peripherals. [mehr]
LPC2148 USB QuickStart Board
Embedded Artists´ LPC2148 CAN QuickStart Board lets you get up-and-running quickly with NXP´s ARM7TDMI LPC213x microcontrollers. The small form factor board offers many unique features that ease your development. Includes Prototype board [mehr]
LPCXpresso Prototype Board
The Prototype board provides you with an easy-to-use expansion area for experiments. The Prototype board can be used for education purposes as well as for experiment and prototype projects. The Prototype board can be used together with the LPCXpresso board or with the mbed module. [mehr]
LPC2468 Developer's Kit
Embedded Artists´ LPC2468 Developer´s Kit lets you get up-and-running quickly with the LPC2468 OEM Board. The LPC2468 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2468 microcontroller suitable for multipurpose communication applications. [mehr]
LPC2103 Education Board
Embedded Artists´ LPC2103 Education Board is the smallest of our education boards and a good start to get to know the NXP LPC2xxx family in general and the LPC2103 in particular. The board contains interesting on-board peripherals that are useful for experiments. The experiments can be further expanded via the expansion connector. The board can be used for education purposes as well as for experiment and prototype projects. [mehr]
LPC2148 Education Board
Embedded Artists´ LPC2148 Education Board is the perfect board to start learning about ARM7 microcontrollers. The board contains many interesting and useful experiments. [mehr]
LPC2129 CAN QuickStart Board
Embedded Artists´ LPC2129 CAN QuickStart Board lets you get up-and-runningquickly with NXP´s ARM7TDMI LPC2129 microcontroller. The small form factorboard offers many unique features that ease your development.Includes the Prototype board [mehr]
LPC2106 RS232 QuickStart Board
Embedded Artists´ LPC2106 RS232 QuickStart Board lets you get up-and-running quickly with NXP´s ARM7TDMI LPC2106 microcontroller. The small form factor board offers many unique features that ease your development. Includes prototype board. [mehr]
Prototype Board for QuickStart Boards
Prototype board for LPC2106 RS232, LPC2129 CAN, LPC2138, and LPC2148 USB QuickStart Boards (headers for each different board type). [mehr]
LPC2478 Developer's Kit
Embedded Artists´ LPC2478 Developer´s Kit lets you get up-and-running quickly with the LPC2478 OEM Board. The LPC2478 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2478 microcontroller suitable for a wide range of applications that requires advanced communication and high quality graphic displays. The Kit is perfect for running uClinux with its large on-board RAM and Flash, network and graphics capabilities. [mehr]
LPC3152 Developer's Kit
Embedded Artists´ LPC3152 Developer´s Kit lets you getup-and-running quickly with the LPC3152 OEM Board. The LPC3152 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3152 microcontroller suitable for a wide range of applications requiring low power consumption, high performance and flexible USB connectivity. [mehr]
LPC3141 Developer's Kit
Embedded Artists´ LPC3141 Developer´s Kit lets you getup-and-running quickly with the LPC3141 OEM Board. The LPC3141 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3141 microcontroller suitable for a wide range of applications requiring low power consumption, high performance and flexible USB connectivity.
Embedded Artists´ LPC2478 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2478 microcontroller suitable for a wide range of applications that requires advanced communication and high quality graphic displays.
Embedded Artists´ LPC3250 Developer´s Kit lets you get up-and-running quickly with the LPC3250 OEM Board. The LPC3250 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3250 microcontroller suitable for applications that require high performance, high integration, and low power consumption. The board can be used in OEM applications, as well as for education purposes, experiment, and prototype projects. [mehr]
LPC3250 OEM Board
Embedded Artists´ LPC3250 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3250 microcontroller suitable for applications that require high performance, high integration,and low power consumption.
The EFM32 Gecko Development Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [mehr]
EFM32G2xx Gecko Development Kit
The EFM32 Gecko Development Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [mehr]
EFM32 Gecko Starter Kit
The EFM32 Gecko Starter Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [mehr]
i.MX25 Product Development Kit
Das neue und mit zusätzlichen Leistungsmerkmalen ergänzte Freescale Entwicklungs-Kit für deni.MX25 basiert auf der erfolgreichen und reichhaltige Software Code Basis deri.MX31, i.MX27 und i.MX35 PDK´s. Damit bekommt der Entwickler ein umfangreiches Kit in die Hand für weniger als $1000. Das i.MX25 PDK basiert auf dem leistungsfähigen und weitverbreiteten ARM926EJ-S™ Kern und bietet aussergewöhnliche Leistung ohne auf lange Batterielaufzeit verzichten zu müssen. Damit können netzbetriebene Geräte entwickelt werden, die die heutigen Anforderungen an energieeffiziente Systeme erfüllen. [mehr]
DEMO9S08QD4 : Demo Board
Das DEMO9S08QD4 ist ein Demoboard für den MC9S08QD4 8-bit Mikrocontroller. Die Applikation kann mit den integrierten Programmierer/Debugger Tools (USB-BDM) und der enthaltenen Software (CodeWarrierTM) schnell und einfach entwickelt werden. [mehr]
MPC8308-RDB Reference Platform
The MPC8308RDB reference platform is ideal for hardware and software development for applications including consumer printing, wireless access points, industrial control and factory automation. [mehr]
MPC8323E Modulares Entwicklungssystem
Dasmodulare Entwicklungssytem(MDS) MPC8323E wurde entwickelt, um sowohl den Hard- als auchSoftwareentwicklern ein Werkzeug an die Hand zu geben, mit dem sie äusserst schnell und effizient Anwendungen für diePowerQUICC II Pro MPC8323E Familie entwickeln können. Der MPC8323E MDS besteht aus folgendenHardware Modulen: dem MPC8323E MDS Prozessor Board (P/N MPC8323E-MDS-PB), dem PowerQUICC Platform I/O Board, dem PowerQUICC PMC zu PCI Modul sowie den PowerQUICC Quad OC-3 ATM und PowerQUICC T1 plug-in Karten. Das System erlaubt auch den Einsatz eines optionellen PCI Expansion Modul Interfaces. Das Plattform I/O Board (AdvancedTCA Formfaktor mit 4 PMC Slots) mit den entsprechenden Erweiterungsmodulen bietet weiterführende Entwicklungsmöglichkeiten. [mehr]
MPC8360EA Modulares Entwicklungssystem
Das MPC8360EA Modular Development System (MDS) wurde für Hardware und Software Ingenieure entwickelt die die PowerQUICC II Pro MPC8360EA Familie benutzen. [mehr]
DEMO9RS08KA2 : Demo Board
Das kostengünstige KA2’s Demoboard ist das erste Entwicklungstool für die neue RS08 Architektur. Anschliessen, Laden, Evaluieren. [mehr]
M53015 Evaluation Board
An evaluation and development system for the MCF5301x family supporting all peripheral functions andcommonly used memory configurations, includes a Linux BSP and a voice commandrecognition demo. [mehr]
i.MX31 Platform Entwicklungs-Kit - Windows CE vorinstalliert
Das i.MX31 PDK, mit Smart Speed™ Technologie isteine umfassend integrierte Hardware und Software Lösung, welche die Produktentwicklung vereinfacht, so dass sich der Anwender auf die verschiedenen kritischen Marktsituationen konzentrieren kann. Es reduziert Entwicklungszeit und es schafftdadurch Zeit für weitere Applikationen, die dann parallel durchgeführt werden können. Auch können brilliante und schnelle Bild- und Grafikapplikationen erzeugt werden mit einer äusserst geringen Verlustleistung. [mehr]
DEMO9S08QG8 : Demo Board
Das DEMO9S08QG8 ist ein Demoboard für den MC9S08QG8 Mikrocontroller. Entwicklung von Applikationscode geht schnell und einfach mit der integrierten USB-BDM Schnittstelle, CodeWarriorTM Development Studio und Softwarebeispielen. Über einen 32-pin Stecker kann das DEMO9S08QG8 Board an eine erweiterte Evaluierungsumgebung angeschlossen werden. [mehr]
DEMO9S08AW60E : Demo Board
Das DEMO9S08AW60E ist ein Demoboard für die MC9S08AW60 Mikrocontroller Familie. Entwicklung von Applikationscode geht schnell und einfach mit der integrierten USB-BDM Schnittstelle, CodeWarrior™ Development Studio und Softwarebeispielen. [mehr]
Demo Board für den 56F8013 Digitalen Signal Controller
Das 56F8013 Demoboard ist ein Evaluationboard, das den 56F8013 Digitalen Signal Controller, eine RS-232 Schnittstelle, Benutzer-LEDs, Benutzer-Drucktaster und eine Steckverbindung für eine Tochterplatine enthält. Der Konnektor für die Tochterplatine ermöglicht das überwachen von Signalen und erweitern von Benutzerfunktionen. [mehr]
MC9S08LC60 Demo Board
Das kostengünstige DEMO9S08LC60 Demo Kitenthältalles, was ein Entwickler benötigt, um Programme zu entwickeln und zu testen. Durch den integrierten USB Multilink kann der Entwickler mit dem Board bzw. einem Zielsystem kommunizieren. Er benötigt lediglich eineinziges USB-Kabel. Mit dem integrierten LCD Display lassen sich auchAnwendungen anderer Arttesten. [mehr]
Demo Board für den 56F8014 Digital Signal Controller
Das56F8014 Demonstration Board ist ein Evaluation ModulBoard, das einen56F8014 Digital Signal Controller enthält sowie ein RS-232 Interface,ansteuerbare LEDs, ansteuerbare Taster und einen Verbindungsstecker. Dieser enthält die Controller-Signale und ermöglichtdamitdie Überwachungund externe Erweiterung der Anwendung. [mehr]
MC56F8037EVM : DSC Evaluation Board
Das MC56F8037EVM Evaluation Modul erlaubt einfachere und schnellere Entwicklung von Anwendungen für 56F802x und 56F803x Digital Signal Controller. Das Modul enthält einen MC56F8037 Digital Signal Controller, eine RS-232 Schnittstelle, Anwender-programmierbare LEDs, Anwender-programmierbare Taster sowie einen Verbindungsstecker zum Anschluß externer Bauteile. [mehr]
Evaluation Kit für MC56F832x und MC56F812x Digital Signal Controller
Das MC56F8323EVM Kit ist ein preiswertes Kit, das alles enthält, um schnell und unkompliziert die Leistungsfähigkeit und Möglichkeiten der MC56F8322 und MC56F8323 Digital Signal Controller und deren Werkzeuge zu testen. Es bietet damit ein effizientes und kostengünstiges Werkzeug zur Hard- und Software-Entwicklung. [mehr]
Evaluation Kit für Digitale Signal Controller
Das MC56F8367EVM ist ein preiswertes Kit, das alles enthält was man zur schnellen Evaluierung der Funktionen und Fähigkeiten der MC56F8145-67 und MC56F8345-67 Mikrocontroller und deren Tools benötigt. Es stellt auch ein effizientes, kostenbewusstes Instrument für Hardware und Software Entwicklung dar. Es kann alleinstehend benutzt werden oder in Verbindung mit Freescale´s grosser Palette an modularer Hardware für Entwicklungen im Bereich Bewegungssteuerung. [mehr]
QUICCstart MPC8343E Evaluations System
Mit dem MPC8343E QUICCstart Evaluation System bekommen Sie eine kosteneffektive, leistungsfähige Plattform zum Entwickeln von fortschrittlichen Netzwerkanwendungen. Der MPC8343E als Teil der PowerQUICC II Pro Familie bietet eine kosteneffektive, hochintegrierte Lösung für Kontrollaufgaben, die die aufkommenden Bedürfnisse von Netzwerk-, Kommunikations- und tiefschürfenden Computer Applikationen adressiert. [mehr]
MPC8313E-RDB Referenz Plattform
Die MPC8313E-RDB Referenzplattform ist ideal zur Hardware und Software Entwicklung für kostenoptimierte Netzwerk-Applikationen. Die kosteneffektive MPC8313E Familie von Kommunikationsprozessoren erfüllt alle Anforderungen verschiedenster Anwendungen im Bereich small office/home office (SOHO), Drucker, IP Services und Industriesteuerungen. [mehr]
QE128 Evaluation Board
Das EVBQE128 Evaluationboard wurde entwickelt zur Evaluierung, Demonstration und Debugging der Freescale Flexis QE128 Mikrocontroller (MC9S08QE128 und MCF51QE128). Das EVBQE128 kann alleinstehend genutzt werden oder kann von einem PC aus über die eingebaute microDART™Schnittstelle gesteuert werden. [mehr]
QE128 Demo Board
Das DEMOQE128 ist ein preiswertes Entwicklungssystem und wurde entwickelt, um die Freescale MC9S08QE128 und MCF51QE128 Mikrocontroller zu demonstrieren, zu evaluieren und zu debuggen. Die Multilink Schaltung auf dem DEMOQE128 Board ermöglicht das Debuggen und Programmieren des Prozessors auf dem DEMOQE128 über USB vom PC aus. Das Demo Board kann ausserdem über den USB Bus mit Strom versorgt werden. [mehr]
MC9S08QE128 Demonstration Board
The DEMOQE128 is a low-cost development system designed for demonstrating, evaluating, and debugging the Freescale MC9S08QE128 and MCF51QE128 microcontrollers. The board supports two interchangeable plug-in daughter cards to quickly evaluate the 8-bit S08 and 32-bit ColdFire V1 QE128 microcontrollers. [mehr]
EVB9S08DZ60: S08D Familie Evaluation Board
Das DZ60 Evaluationboard mit seinen erweiterten I/O Funktionen und grossem Experimentierfeld ermöglicht dem Anwender das Programmieren und Debuggen von fortschrittlichen Anwenderprogrammen. Es kann alleinstehend benutzt werden oder über das eingebaute USB-BDM Interface mit einem PC. [mehr]
DEMO9S08DZ60: S08D Familie Demo Board
Das DEMO9S08DZ60 ist ein Demoboard für die MC9S08DZ60 Mikrocontroller Familie. Entwicklung von Applikationscode geht schnell und einfach mit der integrierten USB-BDM Schnittstelle, Muster-Softwaretools und Softwarebeispielen. Ein optionaler BDM_PORT Port ermöglicht die Nutzung eines BDM_PORT Kabels. Zwei 40-pin Steckverbindungen erlauben den Zugriff auf alle I/O Signale der Ziel-MCU. [mehr]
DEMOAC: Flexis™ AC Familie Demo Board
Das DEMOAC bietet eine Support-Plattform für Freescale Mikrocontroller, die Teil des Flexis Continuum sind. Die Ziel-Mikrocontroller sind in Form von Plug-in Modulen verfügbar, um ein schnelles Wechseln der Ziel MCU zu unterstützen. [mehr]
DEMO9S08SH8: Demo Board
DasDEMO9S08SH8 ist ein Demo-Board für die S08SH8 und S08SG Freescale Mikrocontroller. Anwendungsentwicklungen können schnell und einfach durchgeführt werden mit der integrierten USB-BDM Schnittstelle und zusammen mit dem CodeWarriorior™ Development Studio sowie vielen Software Beispielen. Ein optionaler BDM_PORT Port kann bei Bedarf verwendet werden mit dem BDM_PORT Kabel. Zwei 40-Pin Anschlüsse erlauben den Zugriff auf alleI/O Signale des Zielprozessors. [mehr]
DEMOJM: S08JM Demo Board
DEMOJMSKT ist ein kostengünstiges Kit zur schnellen Mikrocontroller Evaluierung. Das Kit enthält eine DEMOJM Basisplatine und eine Tochterplatine mit einem 64 LQFP Sockel für den MC9S08JM60. Mit dem Kit können die Funktionen des MC9S08JM60 Bauteils getestet werden, mit aunterstützung des eingebauten USB 2.0 full-speed Bausteins. [mehr]
DEMO9S08AC60E: Demo Board für S08AC
Das DEMO9S08AC60 ist ein Demoboard für die S08AC Mikrocontroller Familie. Entwicklung von Applikationscode geht schnell und einfach mit der integrierten USB-zu-BDM Schnittstelle, CodeWarrior™ Development Studio und Softwarebeispielen. [mehr]
DEMO9S08SG32: Demonstrationsboard für den MC9S08SG32
Das DEMO9S08SH32/SG32 ist ein Demo-Board für die MC9S08SH und MC9S08SG Freescale Mikrocontroller. Anwendungsentwicklungen können schnell und einfach durchgeführt werden mit der integrierten USB-BDM Schnittstelle und zusammen mit dem CodeWarriorior™ Development Studio sowie vielen Software Beispielen. Ein optionaler BDM_PORT Port kann bei Bedarf verwendet werden mit dem BDM_PORT Kabel. Zwei 40-Pin Anschlüsse erlauben den Zugriff auf alle I/O Signale des Zielprozessors. [mehr]
DEMO9S08SG8: Demo Board für den MC9S08SG8/5
Das DEMO9S08SH8/SG8 ist ein Demoboard für die MC9S08SH und MC9S08SG Mikrocontroller. Entwicklung von Applikationscode geht schnell und einfach mit der integrierten USB-BDM Schnittstelle, Muster-Softwaretools und Softwarebeispielen. Ein optionaler BDM_PORT Port ermöglicht die Nutzung eines BDM_PORT Kabels. Zwei 40-pin Pfostensteckerleisten erlauben den Zugriff auf alle I/O Signale der Ziel-MCU. [mehr]
MC9S08RG60 Demo Board
Das DEMO9S08RG60 Demoboard ermöglicht Designern die Entwicklung und Evaluierung mit Mikrocontrollern der S08RG, RC, RD, oder RE Familien. Entwicklung von Anwendungs-Software geht schnell und einfach mit dem integrierten DB9 seriellen Kabel, Softwaretools-Demo, Beispielen und dem Debug Monitor. Der Debug Port ist in Verbindung mit Entwicklungstools vorgesehen und ist kompatibel mit dem HCS08BDM Schnittstellenkabel und Software. Mit der 40-Pin Pfostensteckerleiste kann das DEMO9S08RG60 Modul an eine Anwenderschaltung angeschlossen werden. [mehr]
DEMO9RS08KA8 Demo Board
DasDEMO9RS08KA8 ist ein Demo-Board für die RS08KA8 Freescale Mikrocontroller zum Evaluieren, Testen und Debuggen. Anwendungsentwicklungen können schnell und einfach durchgeführt werden mit der integrierten USB-BDM Schnittstelle und zusammen mit dem CodeWarrior™ Development Studio sowie vielen Software Beispielen. [mehr]
QE8 Demo Board
DEMO9S08QE8 ist ein kostengünstiges Board zur schnellen Mirkocontroller Evaluierung. Das Board besteht aus einem DEMOQE Basisboard und einer DC9S08QE8 Tochterkarte. Zusammen können sie verwendet werden, um die wichtigsten Funktionen des MC9S08QE8 Bauteils aufzuzeigen und testen zu können. Das Board besitzt ausserdem eine Anschlussklemme zur Messung des extrem niedrigen Stromverbrauch des MC9S08QE8 Bauteils. [mehr]
Evaluations System für die MCF51JM128 Flexis USB Familie
Voll ausgestattes Evaluierungssystem für die ColdFire JM128 Flexis USB Familie. Dieses Evaluierungssystem unterstützt USB host, device und OTG wie auch integriertes CAN. [mehr]
MPC8349E modulares Entwicklungssystem
Das modulare MPC8349E Entwicklungssystem (MDS) wurde entwickelt zur Unterstützung von Hard- und Softwareentwickler, die Produkte der PowerQUICC II Pro MPC8349E Familie einsetzen. Das MPC8349E MDS besteht aus drei verschiedenenHardware Modulen: das MPC8349E Prozessor Board, das PowerQUICC Plattform I/O Board und das PowerQUICC PMC zu PCI Modul. Das System hat optionale USB und PCI Schnittstellen für Erweiterungsmodule. [mehr]
MPC837xE Modulares Entwicklungssystem
Das modulare Entwicklungssystem (MDS) MPC837x unterstützt Entwickler bei der Systementwicklung für die MPC837xE Familie. Mit Hilfe dieser Plattform kann der Entwickler schnell seinen Controller initialisieren, neue Anwendungs-Software erstellen und Leistungsmessungen durchführen. Auch für Test- und Demonstrationszwecke für viele Anwendungszwecke wie z. B. Netzwerke, Drucker und Datenspeicherung ist es vielseitig einsetzbar. [mehr]
QUICCStart MPC8555E Evaluierungs-System
Das Freescale QUICCstart MPC8555 Evaluierungssystem ist eine leistungsfähige und kostengünstige Plattform, die es dem Entwickler ermöglicht schnell ein Projekt mit dem Freescale MPC8555E PowerQUICC III zu entwickeln und zu testen. Das beschleunigt die Markteinführung und erhöht die Zuverlässigkeit. [mehr]
MPC8541ECDS: Entwicklungssystem für den MPC8541E
Das MPC8560ADS Board wurde entwickelt, um Hard- und Softwareentwickler der PowerQUICC™ III Familie zu unterstützen mit einer Plattform für MPC85xx Derivate im 783-Pin FC-PBGA Gehäuse. Das MPC8560ADS Board unterstützt MPC85xx Prozessoren und besitzt ein 64MB SDRAM, das am 60x bus (auf dem Board) angeschlossen ist, sowie ein 8MB Programm Flash SIMM (bis zu 32MB möglich). An on-board Schnittstellen stehen JTAG/COP, zwei UART, zwei 100/10-Base-T Fast Ethernet und ein 155 Mbps ATM UNI mit optischem Interface zur Verfügung. [mehr]
MPC8544E: PowerQUICC III Processor
The MPC8544/E PowerQUICC™ III is designed to offer the unique combination of high performance, exceptional integration and lower overall power consumption required for networking, communications and industrial control applications. [mehr]
MPC8555 konfigurierbares Entwcklungssystem
Das CDS wurde entwickelt, um Hard- und Softwareentwickler der PowerQUICC™ III Familie mit einer Plattform für MPC8555E und MPC8541E Derivate im 783-Pin FC-PBGA Gehäuse zu unterstützen. Das CDS ist mit einem U-boot und einem Linux BSP vorinstalliert und hat ein256MB DDR SDRAM DIMM Modul und 2 Flash 64MB Flash Speicherbänke. Folgende Schnitstellen stehen zur Verfügung:JTAG/COP, USB, zwei UART, zwei PCI, 10/100/1000 Base-T Fast Ethernet Ports und ein 155 Mbps ATM UNI mit optischem Interface. [mehr]
EVB9S08DZ60_128: Evaluation Boards für die S08D Familie
Das EVB9S08DZ60/128 Evaluation Board erlaubt dem Anwender Programme zu schreiben und zu testen mit erweiterten I/O Funktionen, Peripherien und einem Experimentierfeld. Es kann als eigenständiges Board eingesetzt werden oder der Controller über die integrierte USB-zu-BDM Schnittstelle angesprochen werden. [mehr]
MPC8568EMDS: Modulares Entwicklungssystem für den PowerQUICC III
Das modulare Entwicklungssystem für den MPC8568E wurde entwickelt, um Hard- und Softwareentwickler der PowerQUICC™ III Familie zu bei Programmentwicklung und Test zu unterstützen. [mehr]
MPC8548E Entwicklungssystem
Das konfigurierbare Entwicklungssystem (CDS) unterstützt eine Reihe von Freescale Prozessoren, die auf der Power Architecture Technologie aufgebauen, wie die MPC8548E Familie mit den Controllern MPC8548, MPC8547E, MPC8545E und MPC8543E. Das System ist hauptsächlich als Entwicklungs- und Testsystem einsetzbar. Das modulare Design ermöglicht eine hohe Anpassungsfähigkeit an die entsprechenden Anwendungen. [mehr]
HPCN-MPC8641D Entwicklungs-Plattform
HPCN ist eine Hochleistungsplattform zur Programmierung und zum Testen des MPC8641D Dual-Core Prozessors, der auf der Power Architecture Technologie basiert. Auch für die Entwicklung des MPC8641 Single-Core ist das System einsetzbar. [mehr]
MPC8560ADS: Entwicklungssystem für den MPC8560
Das MPC8560ADS Board wurde entwickelt, um Hard- und Softwareentwickler der PowerQUICC™ III Familie mit einer Plattform für den MPC8560 im 783-Pin FC-PBGA Gehäuse zu unterstützen. [mehr]
i.MX27 Lite Development Kit
Building on the success of low-cost, high-performance application development kits, Freescale introduces the i.MX27 Lite Kit. Once again, Developed in Logic Product Development and Freescale have worked together to deliver a product-ready software and hardware platform for OEMs, ODMs, IDHs and independent developers and a price point that´s quite appealing. [mehr]
QE32 Demo Board
Das DEMO9S08QE32 ist ein preiswertes Entwicklungssystem und wurde entwickelt, um die Freescale MC9S08QE32 Mikrocontroller zu testen, zu evaluieren und zu debuggen. Die Multilink Schaltung der Fa. P&E auf dem DEMO9S08QE32 Board ermöglicht das Debuggen und Programmieren des Prozessors auf dem DEMO9S08QE32 über USB vom PC aus. Das Demo Board kann ausserdem über den USB Bus mit Strom versorgt werden. [mehr]
Integriertes Multimedia und Kommunikationsprozessor Entwicklungssystem
Das MPC8536E Entwicklungssystem (MPC8536DS) eignet sich hervorragend für die Hardware- und Softwareentwicklung von Embedded-Applikationen.Es nutzt die Vorteile von Freescale’s hochintegriertem MPC8536E Prozessor, welcher auf der Power Architecture® Technologie und erstklassigen externen Komponenten basiert. [mehr]
DEMO9S08LA8 DEMO Board
Das kostengünstige DEMO9RS08LA8 Demokit enthält alles, was ein Designer zum Entwickeln und Testen von Anwendersoftware benötigt. Mit dem integrierten USB Multilink kann der Entwickler mit nur einem einzigen USB Kabel mit dem Board und seiner Ziel-MCU kommunizieren. [mehr]
DEMO9S08LL16 Demo Board
Das kostengünstige DEMO9RS08LA8 Demokit enthält alles, was ein Designer zum Entwickeln und Testen von Anwendersoftware benötigt. Mit dem integrierte USB Multilink kann der Entwickler mit nur einem einzigen USB Kabel mit dem Board und seiner Ziel-MCU kommunizieren. [mehr]
S08JM16 Demo Board
Das DEMO9S08JM16 ist ein kostengünstigesDemo Kit, das eine schnelle MC9S08JM16-Evaluierung möglich macht. Das Kit enthält ein DEMOJM Basisboard sowie eine MC9S08JM16 Erweiterungskarte und kann dazu verwendet werden, die Leistungsmerkmale des MC9S08JM16 einfach über den On-chip USB 2.0 Full-speed Device Controller und Empfänger zu testen. Die USB Leistungsmerkmale werden Hardwareseitig durch einen dedizierten USB mini-AB Anschluss und Softwareseitig durch den kostenlosen und mitgelieferten USB-LITE Stack von CMX unterstützt. Der Integrierte USB-BDM Schaltkreis ermöglicht das Debuggen und Programmieren und steht zur seriellen Kommunikation und als einfacher Logikanalysator zur Verfügung. [mehr]
MPC837xE Modular Development System
Dasmodulare Entwicklungssystem (MDS) für den MPC837xE unterstützt Entwickler dadurch, dass es eine auf der MPC837xE-Familiebasierende Plattform für Systementwicklung bietet. Diese Plattform ermöglicht es Entwicklern, Firmware und neue Software-Applikationen zu entwickeln sowie Leistungs-Benchmarks durchzuführen. Sie kann außerdem auch für die Kundenevaluierung und Demozwecke in verschiedensten Anwendungsbereichen, wie zum Beispiel Netzwerke, Drucker und Datenspeicherung verwendet werden. [mehr]
MPC82xx Familie Entwicklungssystem
Das PQ2FADS-VR Board wurde entwickelt, um Hard- und Softwareentwickler der PowerQUICC™ II Familie zu unterstützen mit einer Plattform für MPC82xx Derivate im 516-pin PBGA (VR oder ZQ) Gehäuse. Das PQ2FADS-VR Board unterstützt den MPC8250, MPC8270 und MPC8275. [mehr]
i.MX23 Evaluation Kit
Das i.MX23 Evaluation Kit (EVK) ist kostengünstig ohne Kompromisse in Bezug auf Leistungsfähigkeit eingehen zu müssen. Letztendlich erlaubt es dem Kunden,die Merkmaleseines eigenenzukünftigen großartigen Produkts zu definieren und zu zeigen. Das EVK unterstützt alle Leistungsmerkmale des Geräts in einem kleinen, Single-Board Design und einem optionalen LCD Add-on-Modul, das es Entwicklern ermöglicht, eine vollständige Entwicklungsplattform zu einem günstigen Preis von weniger als $600 USD zu erwerben. [mehr]
MC56F8006 Digitaler Signal Controller Demo Board
Das MC56F8006DEMO-T ist ein kosteneffektives Board zum schnellen Evaluieren, Demonstrieren und Debuggen des Freescale MC56F8006VLF Digitalen Signal Controllers. Das Board kann USB Kommunikation out-of-the-box abwickeln. Das MC56F8006 Demo Board hat 6 LEDs, die mit PWM Kanälen zum Anzeigen von Signalen, einem Reset und zwei IRQ Taster verbunden ist. [mehr]
DEMO9S08JS16 Kit
DEMO9S08JS16 ist ein kostengünstiges Demo-Kit, das eine schnelle MC9S08JS16-Evaluierung ermöglicht.
Das DEMO9S08LG32 ist ein Demoboard für den MC9S08LG32 8-bit Mikrocontroller. Mit dem integrierten USB-BDM, Demos für die Softwaretools und Softwarebeispielen können Applikationen schnell und einfach entwickelt werden. Ein optionaler BDM_PORT Port ermöglicht die Benutzung eines einzigen BDM_PORT Kabels. Eine 80-Pin Pfostensteckerleiste bietet Zugriff auf alle I/O Signale der Ziel MCU. [mehr]
TWR-MCF51CN-KIT: Preiswertes Entwicklungskit für MCF51CN129
Das TWR-MCF51CN-KIT ist ein preiswertes Entwicklungstool für den MCF51CN128 Ethernet Mikrocontroller. Das Kit ist Teil des Freescale Tower Systems, einer modularen, rekonfigurierbaren Entwicklungsplattform mit Evaluation Boards, Tools und Runtime Software. [mehr]
MPC8569E Modulares Entwicklungssystem (MDS)
Das modulare Entwicklungssystem (MDS) für den MPC8569E ist für Hard- und Software-Entwickler entworfen worden, die den MPC8569E PowerQUICC III Prozessor verwenden, und hilft, Ihre Entwicklung zu beschleunigen, zu testen und schneller auf den Markt zu kommen. [mehr]
S08MP16 Demonstration board
The DEMO9S08MP16 is a low cost development system supporting MC9S08MP16 Microcontrollers. P&E’s Embedded Multilink circuitry on the DEMO9S08MP16 board allows the on-board processor connected to the DEMO9S08MP16 to be debugged and programmed via USB from a PC. In addition, the demo board can be powered using the USB bus. [mehr]
Tower System Coldfire® V2 MCF5225X Connectivity Module
The TWR-MCF5225X-KIT is a low-cost development tool for the MCF5225X V2 ColdFire® devices. Offered as a kit or as a standalone board, the TWR-MCF5225X is part of the Freescale Tower System, a modular, reconfigurable development platform that allows designers to get to market faster with packaged evaluation boards, tools and runtime software. [mehr]
TWR-S08LL64 Tower System 8-bit Segment LCD Module
The cost effective TWR-S08LL64-KIT development tool is part of the Tower System and features the MC9S08LL64 segment LCD controller. It provides everything a designer needs to develop and evaluate application code. The integrated OSBDM allows a designer to communicate with the board and target device with only a USB cable and the board highlights the MCU´s low power features. [mehr]
i.MX51 Evaluation Kit
Freescale delivers the cost-effective i.MX51 evaluation kit, allowingcustomers to develop, debug and demonstrate their next great product withoutcompromising performance. [mehr]
Easy Kit XE167F
Easy Kit Hardware, Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual,Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version),, Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), Training Documentation, Demo Programs, Hands On Training (HOT) [mehr]
Easy Kit XE164F
Easy Kit Hardware, Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version),, Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), Training Documentation, Demo Programs, Hands On Training (HOT) [mehr]
IAR KickStart Kit for AT91SAM7S contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:AT91SAM7S development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) and IAR J-Link debug probe [mehr]
KickStart Development Kit for NXP LPC2106 + J-Link probe
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG probe. [mehr]
KickStart Development Kit Plus for NXP LPC2129
IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2129 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [mehr]
KickStart Development Kit Plus for NXP LPC2138
IAR Systems introduces a complete hardware and software development kit for ARM developers. The IAR KickStart Development Kit for NXP LPC2138 contains all necessary hardware and software and allows you to design, develop, implement and test your ARM applications on the LPC2138 chip from NXP.Whether you are a novice or seasoned developer, you will find the development kit a tremendous time-saver with its programming examples and flash programming tools available from the IAR Embedded Workbench. [mehr]
KickStart Development Kit for TI's TMS470
IAR KickStart Kit for Texas Instruments´ TMS470 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: TMS470R1A256 development board from SoftBaugh IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 16KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK JTAG debugger [mehr]
KickStart Kit for LPC2103 + J-Link on-board
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: • LPC2103 development board,• J-Link on-board, IAR visualSTATE evaluation edition, 20-state limitation,• IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for LPC2103 + J-Link JTAG probe
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2103 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger with USB connector. [mehr]
Kickstart Kit for LPC2148
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects).
KickStart Kit for STR912F plus j-link JTAG Debugger
The IAR KickStart board for STR912FA contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR912FA development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for STR912F
The IAR KickStart board for STR912FA contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR912FA development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for LPC2468 plus j-link JTAG debugger
IAR KickStart Kit for LPC2468 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2468 Development board, IAR visualSTATE evaluation edition, IAR PowerPac for ARM evaluation edition, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-Link for ARM, Example applications for the LPC2468 board from IAR Systems, IAR PowerPac board support package, Board support software package for Micrium µC/OS-II evaluation edition [mehr]
KickStart Kit for LPC2468
IAR KickStart Kit for LPC2468 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2468 Development board, IAR visualSTATE evaluation edition, IAR PowerPac for ARM evaluation edition, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for LPC2138
IAR KickStart Kit for LPC2138 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2138 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects).
Kickstart Kit for LPC2148 plus j-link JTAG debugger
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [mehr]
Kickstart Kit for LPC2148 plus j-link JTAG debugger and trace connectors
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [mehr]
KickStart Kit for LPC2378
IAR KickStart Kit for LPC2378 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: Olimex LPC2378 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for LPC2378 + J-Link JTAG probe
IAR KickStart Kit for LPC2378 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: Olimex LPC2378 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for LPC2129
IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2129 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for LPC2106 plus j-link JTAG debugger
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [mehr]
KickStart Kit for LPC2106
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2103 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [mehr]
KickStart Kit for AT91SAM7S
The IAR KickStart board for AT91SAM7S contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7S development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [mehr]
KickStart Kit for AT91SAM7X + J-Link JTAG probe
IAR KickStart Kit for AT91SAM7X contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7X development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) IAR J-Link debug probe [mehr]
KickStart Kit for AT91SAM7X
IAR KickStart Kit for AT91SAM7X contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7X development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [mehr]
KickStart Kit for AVR32UC3A plus j-link JTAG debugger
IAR KickStart Kit for Atmel AT32UC3A contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT32UC3A development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench for AVR32 with a 32KB edition of IAR C/C++ Compiler (including example projects) AVR JTAGICE mkII [mehr]
KickStart Kit for AVR32UC3A
IAR KickStart Kit for Atmel AT32UC3A contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT32UC3A development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench for AVR32 with a 32KB edition of IAR C/C++ Compiler (including example projects) AVR JTAGICE mkII [mehr]
KickkStart Kit for MCF52223 +J-Liink JTAG Probe
IAR KickStart Kit for MCF52223 (ColdFire) contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: MCF52223-SK development board IAR visualSTATE evaluation edition (including example projects) IAR Embedded Workbench for ColdFire with a 16KB/32KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK for ColdFire BDM 26 debugger [mehr]
KickStart Kit for MCF52223
IAR KickStart Kit for MCF52223 (ColdFire) contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: MCF52223-SK development board IAR visualSTATE evaluation edition (including example projects) IAR Embedded Workbench for ColdFire with a 16KB/32KB edition of IAR C/C++ Compiler (including example projects) [mehr]
KickStart Kit for LM3S102
The IAR KickStart Kit for Luminary LM3S102 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LM3S102 development board from Luminary with IAR J-Link on chip IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with an 8KB edition of IAR C/C++ Compiler (including example projects) [mehr]
KickStart Kit for LM3S811
The IAR KickStart Kit for Luminary LM3S811 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LM3S811 development board from Luminary with IAR J-Link on chip IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with an 8KB edition of IAR C/C++ Compiler (including example projects) Complete documentation: Quickstart guide, datasheets, schematics, application notes, and programming examples. [mehr]
KickStart Kit for STR750F plus j-link JTAG Debugger
The IAR KickStart board for STR750F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR750F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for STR750F
The IAR KickStart board for STR750F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR750F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for STR731F plus j-link JTAG Debugger
The IAR KickStart board for STR731F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR731F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for STR731F
The IAR KickStart board for STR731F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR731F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for STR730F plus j-link JTAG debugger
The IAR KickStart board for STR730F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR730F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for NXP LPC1114
IAR KickStart Kit for LPC1114 contains the necessary hardware and software andallows you to design, develop, integrate and test your NXP LPC11XX applications. [mehr]
KickStart Kit for STR730F
The IAR KickStart board for STR730F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR730F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for STR712F plus j-link JTAG debugger
The IAR KickStart board for STR712F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for STR712F
The IAR KickStart board for STR712F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for STR711F plus j-link JTAG debugger
The IAR KickStart board for STR711F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR711F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [mehr]
KickStart Kit for STR711F
The IAR KickStart board for STR711F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [mehr]
KickStart Kit for STM32 + J-Link JTAG probe
The IAR KickStart Kit for STM32 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: STM32 development board IAR visualSTATE evaluation edition, 20-state limitation (including example projects) IAR PowerPac for ARM evaluation edition (including board support) IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK JTAG debugger Micrium board support [mehr]
KickStart Kit for STM32
The IAR KickStart board for STM32 contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STM32 development board IAR visualSTATE evaluation edition, 20-state limitation (including example projects) IAR PowerPac for ARM evaluation edition (including board support) IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK Lite for ARM debug probe, Micrium board support [mehr]
KickStart Kit for SL ToolStick
IAR KickStart Kit for the Silicon Labs ToolStick contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: [mehr]
KickStart Kit for LPC2478
IAR KickStart Kit for LPC2478 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: [mehr]
KickStart Kit for LPC1768
IAR KickStart Kit for LPC1768 contains all the necessary hardware and softwareand allows you to design, develop, integrate and test your applications. [mehr]
Includings : - Easy Kit Version 3 - Getting Started, first 3 Steps to setup your Hardware, install the Tools and Debug the first Program, - Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version), - Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), - Training Documentation, Demo Programs, Hands On Training (HOT). [mehr]
Starter Kit XC888
This kit allows evaluation of the SAx-XC88x group microcontrollers. [mehr]
Starter Kit XC866
This kit allows evaluation of the SAx-XC866 group of microcontrollers. [mehr]
Intel® Atom™ processor N270Δ and Mobile Intel® 945GSE Express chipset development kit
The Intel® Atom™ processor N270Δ and Mobile Intel® 945GSE Express chipset development kit provides robust performanceper-watt, power-efficient graphics and rich I/O capabilities for cost-effective embedded solutions. [mehr]
Intel® Atom™ Processor Z5xx Series and Intel® System Controller Hub US15W Development Kit
The Intel® Atom™ processor Z5xx series and Intel® System Controller Hub US15Wdevelopment kit offers a versatile platform for numerous embedded applicationsincluding in-vehicle infotainment, medical, interactive client (kiosks,point-of-sale terminals), gaming, and industrial control. [mehr]
Atmel AT91RM9200 Evaluation Board
ITAT91RM9200 is a medium size (160x120 mm) board based on Atmel`s AT91RM9200 32-bit ARM920T RISC microcontroller. The board is well suited for a wide range of application development and prototyping purposes, and is capable of running different kinds of operating systems and debugging systems such as the iSYSTEM iC3000 debugger using JTAG and ETM debugging resources.
NXP LPC2138 Target Board is an evaluation and a development system for NXP ARM7TDMI-S based LPC2138 microcontroller. The ITLPC2138 package consists of a USB cable and a target board populated with: NXP LPC2138 CPU, minimum peripherals, JTAG debug connector, ETM trace connector and an on-board integrated iSYSTEM debugger. The user can write and debug the a [mehr]
ST STR9 Evaluation Board
ITSTR9 is a medium size (167x105 mm) board based on ST`s STR912FW44 32-bit microcontroller.The ITSTR9 board is based on universal base board with all peripheral (LCD, LED’s, push buttons, power supply, prototyping area,…) and piggyback module with target CPU. The board is well suited for a wide range of application development and prototyping purposes [mehr]
MCBSTR750 Evaluation Board +ULINK2 JTAG Adapter
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [mehr]
MCB2100 Evaluation Board
MCB2100 Evaluation Board introduces you to the NXP LPC2129 family of ARM processors and allows you to create and test working programs for this advanced architecture. Two CAN and two serial interfaces are available. [mehr]
MCB2130 Evaluation Board
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULink USB-JTAG adapter. [mehr]
MCBSTR7 Evaluation Board
The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 family and allows you to create and test working programs for this ARM-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) are available. Debugging is supported via the JTAG interface and the Keil ULink USB-JTAG adapter. An evaluation copy of the Keil ARM Development Tools is included. [mehr]
MCB2140 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCBSTR9 Evaluation Board
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). It provides Serial (RS-232), CAN, Ethernet, and USB interfaces as well as eight LEDs, analog input (via potentiometer), and several push buttons. [mehr]
MCB900 Evaluation Board
The Keil MCB900 Evaluation Board is a versatile, flexible prototype board for the NXP P89LPC93x microcontroller family. MCB900 connects to the a COM port of your PC via the serial COM interface. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic. [mehr]
MCBXC866 Evaluation Board
The Keil MCBXC866 Evaluation Board introduces you to the Infineon XC800 microcontroller family and allows you to create and test working programs for this 8051-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project. [mehr]
MCBSTM32 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [mehr]
MCBSTR9 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the included Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). [mehr]
MCBSTR9 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the included Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). It provides Serial (RS-232), CAN, Ethernet, and USB interfaces as well as eight LEDs, analog input (via potentiometer), and several push buttons. [mehr]
MCBSTM32 Evaluation Board+ ULINK-ME JTAG Adapter
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [mehr]
MCB2370 Evaluation Board
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [mehr]
MCB2460 Evaluation Board
The Keil MCB2460 Evaluation Board introduces you to the NXP (founded by Philips) LPC2400 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCBSTR750 Evaluation Board +ULINK-ME JTAG Adapter
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [mehr]
MCB2103 Evaluation Board
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2140 Evaluation Board
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB950 Evaluation Board
The Keil MCB950 Evaluation Board is a versatile, flexible prototype board for the NXP P89LPC952 microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic. [mehr]
MCBSTR730 Evaluation Board
The Keil MCBSTR730 Evaluation Board introduces you to the STMicroelectronics STR730 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCBSTR750 Evaluation Board
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [mehr]
MCBSTM32 Evaluation Board
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [mehr]
MCBSTR7 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 family and allows you to create and test working programs for this ARM-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) are available. Debugging is supported via the JTAG interface and the Keil ULink-ME USB-JTAG adapter. An evaluation copy of the Keil ARM Development Tools and ULINK-ME is included. [mehr]
MCB2388 Evaluation Board
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [mehr]
MCB2387 Evaluation Board
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [mehr]
MCB2387 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board with the ULINK-ME the USB-JTAG adapter a great starting point for your next ARM project. [mehr]
MCB2460 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2460 Evaluation Board introduces the NXP LPC2460 ARM family. It allows you to create and test working programs for this architecture.Two CAN & serial interfaces, analog input, QVGA LCD w/touch screen, USB, and Ethernet with the ULINK2 the USB-JTAG Adapter, make this board a great starting point for your ARM project. [mehr]
MCB2130 Evaluation Board + ULINK2 JTAG Adapter
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULINK2 USB-JTAG adapter. [mehr]
MCB2130 Evaluation Board + ULINK-ME JTAG Adapter
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULINK-ME USB-JTAG adapter. [mehr]
MCB2140 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2360 Evaluation Board + ULINK2 Adapter
The Keil MCB2360 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [mehr]
MCB2360 Evaluation Board + ULINK-ME Adapter
The Keil MCB2360 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [mehr]
MCB2370 Evaluation Board + ULINK2 JTAG debugger
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [mehr]
MCB2370 Evaluation Board + ULINK-ME JTAG debugger
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [mehr]
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2103 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2388 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [mehr]
MCB2388 Evaluation Board + ULINK JTAG Adapter
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [mehr]
MCB2387 Evaluation Board + ULINK2 Adapter
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board with the ULINK2 USB-JTAG adaptor a great starting point for your next ARM project. [mehr]
MCB2900 Evaluation Board
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2900 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB2900 Evaluation Kit + ULINK-ME JTAG Adapter
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCB1760 Evaluation Board
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture. [mehr]
MCB1760 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture using the included Keil ULINK2 JTAG debugger for high-performance Debug/Download. [mehr]
MCB1760 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture using the included Keil ULINK-ME JTAG debugger/programmer for high-performance Debug/Download. [mehr]
MCBSTM32C Evaluation Board
The Keil MCBSTM32C Evaluation Board introduces the new STM32 Connectivity family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCBSTM32C has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. [mehr]
MCBSTM32E Evaluation Board
The Keil MCBSTM32E Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture.Featuring a QVGA LCD display plus a wide range of interfaces such as USB, CAN, MicroSD Card and UART, the MCBSTM32E is a great starting point for your Cortex-M3 project. [mehr]
MCB1343 Evaluation Board
The Keil MCB1343 Evaluation Board introduces the new NXP LPC134x family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB1343 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. [mehr]
MCB2470 Evaluation Board
The Keil MCB2460 Evaluation Board introduces you to the NXP (founded by Philips) LPC2470 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
MCBTMPM330 Evaluation Board
The Keil MCBTMPM330 Evaluation Board introduces you to the Toshiba TMPM330 family of ARM Cortex-M3 processor-based devices and allows you to create and test working programs for this advanced Cortex-M3 architecture. [mehr]
MCBXC167 Evaluation Board
The Keil MCBXC167 Evaluation Board introduce you to the Infineon XC16x microcontroller family and allow you to create and test working programs for this advanced architecture. [mehr]
MCB XC88x Evaluation Board
The Keil MCBXC88x Evaluation Board introduces you to the Infineon XC88x microcontroller family and allows you to create and test working programs for this 8051-based architecture. A CAN interface, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project. [mehr]
MCBx51 Evaluation Board
The Keil MCBx51 Evaluation Board works with all 44-pin 8051 and 251 devices including the Intel 251Sx/Tx; Atmel T80C251G1D/G2D and 8051Rx2; Philips 8051Rx2 and 8xC664; Various Winbond devices; and Dallas 320, 420, and 520.Use this board to become familiar with the 8051 and 251 microcontroller families. [mehr]
NXP LH7A404 Card Engine
Logic´s complete line of development kits fast forward development and help engineers stay focused on their high-value core technologies.All development kits include an application baseboard, System on Module (SOM), and the accessories required to immediately begin development work. [mehr]
Zoom™ OMAP35x Torpedo Development Kit
By providing a product-ready software and hardware platform, Logic PD´s embedded product solutions fast forward development and helps your company stay focused on its high-value core technologies. The Zoom OMAP35x Torpedo Development Kit is a low-cost, high-performance application development kit for evaluating the functionality of the OMAP35x Torpedo System on Module (SOM). [mehr]
Texas Instruments Zoom™ OMAP36x MDP
The Zoom OMAP36x Mobile Development Platform (MDP) is a fully-featured evaluation platform built around the Texas Instruments (TI) OMAP3630 applications processor. [mehr]
Zoom™ TI AM3517 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom AM3517 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ AM3517 applications processor and Logic PD´s System on Module (SOM). [mehr]
Zoom™ SDK for NXP LH79524
By providing a product-ready hardware and software platform, Logic PD´s embedded solutions fast forward development and help you stay focused on your high-value core technologies. The Zoom Starter Development Kit (SDK) is a low-cost, high-performance application development kit for evaluating the functionality of the System on Module (SOM) Card Engine and associated processor. [mehr]
Zoom SDK for NXP LH7A404
By providing a product-ready hardware and software platform, Logic PD´s embedded solutions fast forward development and help you stay focused on your high-value core technologies. The Zoom Starter Development Kit (SDK) is a low-cost, high-performance application development kit for evaluating the functionality of the System on Module (SOM) Card Engine and associated processor. [mehr]
Zoom™ TI OMAP-L138 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom OMAP-L138 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ energy-efficient OMAP-L138 applications processor and Logic PD´s System on Module (SOM). [mehr]
Zoom™ TI OMAP-L138 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom OMAP-L138 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ energy-efficient OMAP-L138 applications processor and Logic PD´s System on Module (SOM). [mehr]
Texas Instruments Zoom™ OMAP35x Development Kit
By providing a product-ready software and hardware platform, Logic PD´s embedded product solutions fast forward development and helps your company stay focused on its high-value core technologies. The Zoom OMAP35x Development Kit is a low-cost, high-performance application development kit for evaluating the functionality of Texas Instruments´ OMAP 3 processors and System on Module (SOM). [mehr]
Professional-Grade Development Kit: i.MX515 ARM Cortex-A8 StackableUSB™ Computer (Linux-ready)
The DK1651-ET-Linux is a turn-key development kit with an extensive Linux tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications. Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [mehr]
Professional-Grade Development Kit: PIC32 Industrial Host Controller for StackableUSB™
The DK1032 is a turn-key development kit with an extensive tool base allowing for immediate out-of-the-box development for the USB1032 PIC Industrial Host (includes board, complete cable set, firmware, and docs). The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered and is well-suited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC. [mehr]
Professional-Grade Development Kit: i.MX515 ARM Cortex-A8 StackableUSB™ Computer (WinCE-ready)
The DK1651-ET-WinCE is a turn-key development kit with an extensive Window CE tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications. Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [mehr]
StackableUSB™ Carrier Board for the Tower System
The CRR-TOWER provides design engineers additional expansion for the Freescale Tower System. With easy access to the rugged StackableUSB connector, users can effortlessly evaluate plug-and-play ¼-size (1.85” x 1.74”) StackableUSB I/O devices. From wireless to GPS to serial conversion, OEMs are able to cost-effectively explore a wealth of peripheral functions for their embedded system. [mehr]
StackableUSB™ Carrier Hub Board for the Tower System
The HUB-TOWER provides design engineers additional expansion for the Freescale Tower System. With easy access to the rugged StackableUSB connector, users can effortlessly evaluate plug-and-play ¼-size (1.85” x 1.74”) StackableUSB I/O devices. From wireless to GPS to serial conversion, OEMs are able to cost-effectively explore a wealth of peripheral functions for their embedded system. [mehr]
i.MX515 ARM Cortex-A8 StackableUSB™ Tower Computer Module (Linux-ready)
The TWR1650 is an i.MX515 evaluation module (with an extensive Linux tool base) boasting a subset of features common to an industrial-grade single board computer.Featuring an 800MHz ARM Cortex-A8 CPU, the TWR1650 delivers the performance needed to enable multimedia rich applications in rugged, harsh environments. Although rich in embedded I/O features, the TWR1650 consumes minimal power, simulating the demanding environmental conditions in which OEMs must operate.OEM versions of the SBC are available to ease transition from development to production. [mehr]
i.MX515 ARM Cortex-A8 StackableUSB™ Tower Module (WinCE-ready)
The DK1651-ET-Linux is a turn-key development kit with an extensive Linux tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications.Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [mehr]
PICDEM CAN-LIN 3 Demonstration Board_duplicate
Microchip offers two similar PICDEM CAN-LIN demonstration boards tosupport different PICmicro® devices. All demonstrate the main featuresof the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [mehr]
PICDEM MC LV Development Board
The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. The board is capable of controlling motors rated up to 48V and 2.2 Amps. [mehr]
PIC32 Starter Kit
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, users quickly learn Microchip´s 32-bit family of microcontrollers and development tools. The kit includes everything needed to write, program, debug, and execute code on a high performance PIC32 microcontroller. [mehr]
PIC32 Plug-In Module
This PIC32 Plug-In Module enables PIC32 development on the Explorer 16 development board (DM24000x) and supports the MPLAB REAL ICE Trace Kit (AC244006). An 80 MHz [mehr]
Explorer 16 Development Board
The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of Microchip´s new PIC24 Microcontroller, the dsPIC33 Digital Signal Controller (DSC) families, and the new 32-bit PIC32MX devices. [mehr]
PICDEM Full Speed USB
ThePICDEM™ FS-USB is a demonstration and evaluation board for thePIC18F4550 family of Flash microcontrollers with full speed USB 2.0interface. The board contains a PIC18F4550 microcontroller in a 44-pinTQFP package, representing the superset of the entire family of devicesoffering the following features:
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchips PIC18F14K50 and PIC18F13K50 20-pin USB microcontrollers. The all-inclusive kit contains the hardware, software, and code examples necessary to bring your next USB design from concept to prototype. Created with the USB novice in mind, the kit includes Getting Started with Microchips Low Pin Count USB Solutions, a self-directed course and lab material designed to ease the learning curve associated with adding USB connectivity to embedded systems [mehr]
PICDEM Touch Sense 2
The PICDEM Touch Sense 2 board features the new peripheral on PIC24F parts called Charge Time Measurement Unit (CTMU). The board uses a PIC24F256GB110 device to implement a slider, 20-button matrixed keyboard and a wheel with center button and a soft power button. The board also works with the mTouch Diagnostic Tool, which is a Graphic User Interface tool use to develop, debug and diagnose the Capacitive Touch application. The GUI works on USB using the supplied USB cable. This product is also part of the Human Interface Program. [mehr]
F1 Evaluation Platform
The F1 Evaluation Platform is a demonstration/development tool for Enhanced Mid-range PIC microcontrollers (PIC12F1xxx/PIC16F1xxx). Populated with a PIC16LF1937 featuring XLP technology, this platform consists of a 44-pin development board with prototyping space, 3V LCD glass, support for the Motor Control add-on (coming soon), and support for PICkit 3 & PICkit Serial. This kit provides a platform for general purpose development, and includes demonstrations focusing on low Power, LCD, and motor control. [mehr]
MPLAB Starter Kit for PIC18F MCU
The MPLAB Starter Kit for PIC18F MCU contains everything needed to experience the high performance and versatility of the PIC18F microcontroller family. It includes an on-board debugger/programming capability as well as USB communication, a capacitive touch pad, potentiometer, acceleration sensor, MicroSD memory card, and an OLED display. The board can function as a USB mouse, joystick or mass-storage device (thumb drive) all using the on-board capacitive touch sense pads. [mehr]
mTouch Cap Touch Evaluation Kit
The mTouch Capacitive Evaluation Kit provides a simple platform for developing a variety of capacitive touch sense applications using PIC16F or PIC24F microcontrollers. The Diagnostic Tool provided allows the user to analyze application-critical information in real-time as it relates to touch sensor behavior. [mehr]
PICDEM Inductive Touch Development Kit
The PICDEM Inductive Touch Development Kit is an evaluation and development platform for Microchips Inductive Touch Technology. Factory programmed firmware provides immediate access to all the boards features through the use of the MPLAB mTouch plug-in. Using a PICkit Serial analyzer to communicate with the PC, it allows the user to analyze application critical information in real-time as it relates to sensor behavior [mehr]
PICDEM.net 2 Development Board
The PICDEM.net™ 2 Development Board (DM163024) is an Internet/Ethernet development board supporting both the popular ENC28J60 Ethernet Controller and the single-chip Ethernet microcontroller family, the PIC18F97J60. With this board, using Microchip’s free TCP/IP stack, a web server can be developed showcasing the capability to remote monitor and control embedded applications over the Internet. [mehr]
PICDEM Lab Development Kit
The PICDEM Lab Development Board is designed to providea comprehensive development and learning platform for virtually all ofMicrochips Flash-based 6-, 8-, 14-, 18-, and 20-pin, 8-bit PICMicrocontrollers.Geared toward first-time PIC Microcontroller usersand University students, the PICDEM Lab Development Board is suppliedwith five of our most popular 8-bit PIC Microcontrollers and a host ofdiscrete components used to create a number of commonly used circuits. Expansion headers provide complete access/connectivity to all pins onthe connected PIC Microcontrollers and all mounted components [mehr]
PIC18F4xK20 Starter Kit
The PIC18F4XK20 Starter Kit is a demonstration and development platformfor Microchips K20 series microcontrollers.The board provides aplatform to highlight this new familys benchmark for lower powerconsumption, low-cost and high-performance operation.It includes thedevelopment board, PICkit 2 Development Programmer/Debugger, andprogramming lessons. [mehr]
PICDEM Touch Sense 1 Development Kit
The PICDEM™ Touch Sense 1 Development Board and Diagnostic Tool provides a platform to introduce users to Microchips Capacitive mTouch™ Sensing Solutions.This board is a completely sealed application example using three different touch sensor configurations in the form of a Directional pad, Keypad, and Slider section.A factory programmed firmware application provides the user immediate access to all of the boards features through the use of the accompanying Windows(R) based Diagnostic Tool and PICkit Serial Analyzer.The Diagnostic Tool provides the user a platform to analyze application critical information in real-time as it relates to touch sensor behavior.This product is also part of the Human Interface Program. [mehr]
dsPICDEM 2 Development Board
The dsPICDEM™ 2 Development Board is a development and evaluation tool that helps create embedded applications using dsPIC30F Digital Signal Controllers. [mehr]
PICDEM 4 Demonstration Board
The PICDEM 4 is a demonstration and evaluation board for the 8-pin, 14-pin, and 18-pin general purpose family of products with power management features. [mehr]
PICDEM 2 Plus
The PICDEM 2 Plus is a simple board that demonstrates the capabilities of many of the 18-, 28- and 40-pin PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, with an in-circuit emulator (e.g., MPLAB® ICE or MPLAB® REAL ICE™) or with an in-circuit debugger, MPLAB ICD 2. [mehr]
PICkit 1 Flash Starter Kit
The PICkit™ 1 Flash Starter Kit is a low-cost development kit with an easy-to-use interface for programming Microchip’s 8-/14-pin Flash family of microcontrollers. [mehr]
PIC18 Explorer Board
This low-cost demo board is for evaluation of our PIC18 MCU families. The PIC18 is our highest performance 8-bit architecture and has three different families: standard PIC18, PIC18 J-series and PIC18 K-series. This single development board supports dozens of the general purpose PIC18 families using various processor Plug-In Modules (PIMs). [mehr]
PICDEM LCD 2 Demonstration Board
The PICDEM LCD 2 Demonstration Board (DM163030) shows the main features of Microchip’s 28, 40, 64 and 80-pin LCD Flash PIC microcontrollers including the LCD voltage booster and contrast controller. It is populated with the PIC18F85J90. [mehr]
Mechatronics Demonstration Kit
The PICDEM™ Mechatronics demonstration board is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system. Learn how to use PIC® microcontrollers to enhance or replace a mechanical design. [mehr]
Low Power Solutions Demonstration Board
The Low Power Solutions Demonstration board provides designers a convenient and fun way to explore PICmicro® nanoWatt features within a functional ultrasonic range-finder application. It features the PIC18F4620, Microchip Technology´s latest power managed device. [mehr]
PIC18 Development Kit
The PIC18 Development Kit is a complete bundle of the essential development tools needed to get started with your next PIC18 application. The kit includes a PIC18 Explorer Board, PICkit 3 Debugger/Programmer, USB cable, and a 9V universal power supply. The PIC18 Explorer Board includes both the PIC18F8722 and PIC18F87J11 microcontrollers and supports dozens of the general purpose PIC18 families using various processor Plug-in Modules (PIMs). [mehr]
PICDEM HPC Explorer Board
The PICDEM HPC Explorer Board replaces the PIC18F8720 64/80L TQFP Demo Board (DM183020). This low-cost demo board is ideal for users who want to evaluate the performance of Microchip high-end 8-bit microcontrollers of the PIC18F series. The board features a PIC18F8722 microcontroller, which is a super set of the entire 64-pin and 80-pin PIC18F general purpose family. An unpopulated Plug-In Module is included for use with the processor of your choice. Just snap off the attached board, populate the board, and plug it in [mehr]
PICkit Serial Analyzer
The PICkit Serial Analyzer is a low-cost USB-based tool used to direct communication between a PC and an external serial device. The kit comes complete with hardware (supporting I2C™, SMBus, SPI and USART protocols), an easy-to-use GUI (to configure and display communications) and a target demonstration board for out-of-the-box functionality. For more advanced users a DLL is also included as an API for developing custom softwar [mehr]
PICDEM System Management Kit
The PICDEM™ System Management Kit is a demonstration and training tool for system integration and the design of a variety of applications. PIC® microcontrollers provide powerful integrated peripherals, ideally suited for such integration tasks. System integration refers to the consolidation of multiple systems within a unified design. [mehr]
MPLAB ICD 3 Evaluation Kit
This kit includes a MPLAB ICD 3 Debugger, a PICDEM 2 Plus (DM163022), and a 9Vuniversal power supply. [mehr]
MPLAB ICD 3 Evaluation Kit With Explorer 16
The MPLAB ICD 3 with Explorer 16 Kit is a complete set of tools for applicationdevelopment using Microchip PIC24F, PIC24H, and dsPIC33 16-bit MCUs. [mehr]
PICDEM CAN-LIN 2 Demonstration Board
Microchip offers two similar PICDEM CAN-LIN demonstration boards to support different PICmicro® devices. All demonstrate the main features of the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [mehr]
LAB-X1 Experimenter Board (Assembled)
The LAB-X1 is microEngineering Labs, Inc.´s first pre-assembled experimenter´s platform. While PICProto boards allow you to create your own projects with a minimum of hassle, the LAB-X1 goes one step further. It provides an assembled testbed containing most of the circuitry commonly used with PICmicro microcontrollers (MCUs). [mehr]
LPC3250-Stick
Plug in the stick and watch the stick application evaluate the performance of an ARM926EJS® core [mehr]
Development Kit for LPC3180
Includes phyCORE-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics.Configuration: Basic System [mehr]
Evaluation Board for LPC 2140
The OM10071 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [mehr]
Evaluation Board for LPC220X ARM MCU
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, IAR Jlink, BAre PCB Expansion Board, PHYTEC Spectrum CD, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.Configuration: Basic System [mehr]
LPC2919 Evaluation Board
This evaluation board hosts the LPC2919 microcontroller from NXP with an embedded ARM968E-S processor core and with an JTAG interface. In addition the driver chips for the external communication interfaces are included together with a wire-wrap area. [mehr]
LPC2919 Evaluation Board + Hitex debugSTICK
This evaluation board hosts the LPC2919 microcontroller from NXP with an embedded ARM968E-S processor core and with an JTAG interface. In addition the driver chips for the external communication interfaces are included together with a wire-wrap area. A compact JTAG debugger is included - Hitex debugSTICK. [mehr]
LPC2478-Stick
Discover the performance of the LPC2468 ARM7TDMI-S based microcontroller with the LPC-Stick! The LPC-Stick is a small modular evaluation kit with optional extension boards. [mehr]
LPC1768 mBed Entwicklungs Board.
Dieses Board arbeitet mit der bahnbrechenden mbed Entwicklungsumgebung und ermöglicht, einen funktionsfähigen Prototyp schneller denn je zu entwickeln. Die enge Kombination aus Hardware und Software macht es leicht, Designs schnell zu untersuchen, so dass sie gewagter, erfindungsreicher und produktiver sein können. [mehr]
LPC1300-Stick
Discover the performance of the LPC1313 or LPC1343 CortexM3TM core with the LPC1313-Stick or LPC1343-Stick. The LPC-Stick is a small modular evaluation kit with optional extension boards. The LPC-Stick package provides target hardware with the relative microcontroller from NXP, user pins and LEDs for applications use. Combined with the proven USB debugger device connection and the non-limited HiTOP development tools the LPC-Stick allows full access to all chip features, debugging and programming. [mehr]
LPC1343 LPCXpresso Board
The LPC1343 LPCXpresso board with NXP´s ARM Cortex-M3 microcontroller has been designed to make it as easy as possible to get started with Cortex-M3. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [mehr]
KickStart Development Kit for NXP LPC2106
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [mehr]
Evaluation Board for LPC213x
OM10045 Evaluation Board introduces you to the NXP LPC2100 family of ARM processors and allows you to create and test working programs for this advanced architecture. Two CAN and two serial interfaces are available. [mehr]
LPC1114 LPCXpresso Board
The LPC1114 LPCXpresso board with NXP´s ARM Cortex-M0 microcontroller has been designed to make it as easy as possible to get started with Cortex-M0. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [mehr]
LPC1768 LPCXpresso Board
The LPC1768 LPCXpresso board with NXP´s ARM Cortex-M3 LPC17xx microcontrollers has been designed to make it as easy as possible to get started with Cortex-M3. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [mehr]
phyCORE®-AT91 System on Module
SOM module based on Atmel 32-bit ARM7 RISC microcontroller with Ethernet, 4 UARTs, 8-ch ADC, 2-ch DAC and JTAG offering up to 16 MB Flash and up to 8 MB SRAM.
Based on the NXP Semiconductors (founded by Philips) ARM7TDMI-S Processor Core, this subminiature System on Module offers 4 CAN interfaces, 10/100 MBits Ethernet, etc. running at 60 MHz CPU speed
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
phyCORE®-XScale/PXA255 Basic Rapid Development Kit
The phyCORE System on Module (SOM) is designed to plug into a PHYTEC Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not [mehr]
phyCORE®-ARM7/LPC2294 Rapid Development Kit - Basic
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
Includes phyCORE®-MCF5485 SBC with 64 MB DDR SDRAM and 32 MB Flash mounted on Carrier Board, Bare PCB Expansion Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, P&E BDM adapter, AC/DC adapter, serial cable and access to schematics. [mehr]
phyCORE®- BF537 Rapid Development Kit
Includes phyCORE®-BF537 SBC with 128 MB SDRAM and 4 MB Flash mounted on Blackfin Carrier Board, Bare PCD Expansion Board, PHYTEC Spectrum CD, ADI CrossView CD with VisualDSP++ IDDE, AC adapter, cables and access to schematics.
Insert-ready SOM supporting Blackfin DSP/MCU with Ethernet, USB, CAN and optional WiLAN, FPGA. Configuration: 500 MHz, 128 MB SDRAM, 4 MB Flash, 32 KB EEPROM, USB, Ethernet, CAN, JTAG interface [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit
Includes phyCORE-LPC3250 SOM with 64 MB SDRAM and 64 MB Flash on phyCORE-LPC3250 Carrier Board, Bare PCB Expansion Board, PHYTEC Kit CD, cables, AC adapter, and access to schematics.
phyCORE®-i.MX31 Rapid Development Kit - Windows Embedded CE
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics.Configuration: WinCE [mehr]
phyCORE®-i.MX31 Rapid Development Kit - Linux
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics. Configuration: Linux [mehr]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - Keil
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, Bare PCB Expansion Board, Keil Ulink2, Keil RealView MDK-ARM Evaluation Software, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + KEIL [mehr]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - IAR
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + IAR [mehr]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - LINUX
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + LINUX [mehr]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash.
phyCORE®-XScale/PXA270 Rapid Development Kit w/ LCD
Includes phyCORE®-PXA270 SOM with 64 MB SDRAM and 32 MB Flash mounted on Carrier Board with Expansion Board, 8.4" Sharp LCD/Touch Panel, Bare PCB Expansion Board, JTAG Adapter, null modem cable, parallel cable, cross-over ethernet cable, power adapter, access to schematics, pre-installed Linux OS or Windows Embedded CE 6.0 demo image and PHYTEC Spectrum CD including SBC hardware manual, evaluation compiler, software demos and Controller User´s Manual
This 32-bit MCU high-performance, low power LCP3180 ARM926EJ-S device from NXP Semiconductors (founded by Philips) provides a vector floating-point co-processor and integrated USB OTG, as well as the ability to operate in ultra-low-power mode down to 0.9V. Configuration:208 MHz, 32 MB SDRAM,32 MB Nand Flash, 32 KB EEPROM, USB OTG, JTAG interface [mehr]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash. Configuration: MCF5485, 200 MHz, 64 MB DDR SRAM, 32 MB Flash, Ethernet, 2.0 USB [mehr]
phyCORE®-MPC5554 System on Module
The Freescale MPC5554 PowerPC microcontroller embodies the continued development of the successful MPC500 family. Configuration: MPC5554 (132 MHz), 2 MB SRAM, 2 MB Flash, CAN, Ethernet, FPGA [mehr]
phyCORE®- MPC5200B tiny System on Module
The phyCORE-MPC5200B tiny is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 16 MB Flash, 128 MB DDR-SDAM, CAN, Ethernet, USB 1.1 host, MMU [mehr]
phyCORE®-MPC5200B I/O System on Module
The phyCORE-MPC5200B I/O is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 32 MB Flash, 128 MB SDRAM, 2 MB SRAM, CAN, Ethernet, FPGA, MMU. [mehr]
phyCORE®-MPC555 System on Module
32-bit PowerPC module in sub-mini dimensions with dual 2.0B CAN, FPU, SPI, dual UART, QADC running at 40 MHz for advanced automotive, avionics and industrial control applications. Configuration: 1 MB RAM, 512 KB Flash, 4 KB EEPROM, ETR [mehr]
phyCORE®-MPC565 System on Module
Based on the Freescale MPC565 microcontroller, this module features Ethernet crossed with Triple On-chip CAN & 64-bit FPU on a credit card size SOM with Burst Flash and SRAM especially suited for calculation-intensive embedded applications. Configuration: 56 MHz, 2 MB Burst-SRAM, 2 MB asynch. external Flash, 1 MB on-chip Flash, 4 KB I2C-EEPROM, CS8900A Ethernet, 3x CAN, 1x J1850, 1x BDM/Nexus, ind temp range, PLD V2 [mehr]
phyCORE®-ARM11/i.MX31 System on Module
The phyCORE-i.MX31 is an ARM®-11 based System on Module populated with the Freescale® i.MX31: a high performance multimedia applications processor. Graphics acceleration, state-of-the-art power management, Floating Point Unit, and rich peripherals such as Ethernet, USB and integrated LCD controller make this module the ideal candidate for computer-bound applications. Configuration: 128 MB DDR RAM, 32 MB NOR Flash, 64 MB NAND Flash, 512 kB SRAM, 32 kBit EEPROM, Ethernet, RTC, USB [mehr]
phyCORE®-ARM7/LPC2294 Rapid Development Kit + Keil
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, Keil ULink2, PHYTEC Spectrum CD, Keil DK-ARM Evaluation Software, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.Configuration: Keil [mehr]
phyCORE®-MPC5554 P&E Micro Rapid Development Kit
Includes phyCORE®-MPC5554 module and Carrier Board, Bare PCB Expansion Board, P&E Micro systems MPC55xx USB-JTAG Debugging Interface, P&E Micro PKGPPC Nexus Starter Edition software, PHYTEC Tool CD for Freescale MPC5554, AC/DC adapter, serial cable and access to schematics.
phyCORE®-ARM9/LPC3250 Rapid Development Kit - Keil
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - IAR
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - WinCE
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250
The phyCORE-LPC3250 is an ARM-9 based, small form factor, OEMable module populated with the NXP LPC3250. State-of-the-art power management, Vector Floating Point Unit (VFP), and rich peripherals such as USB OTG, Ethernet, and integrated LCD controller make this module the ideal candidate for embedded applications requiring high performance and low power consumption. [mehr]
phyCORE®-ARM11/i.MX31
The phyCORE-i.MX31 is an insert-ready System on Module (SOM) subassembly in miniature dimensions, populated with the Freescale i.MX31. [mehr]
phyCORE®-i.MX27
The phyCORE-i.MX27 is a subminiature (84 x 60 mm) insert-ready System on Module populated with the Freescale i.MX27 microcontroller. [mehr]
miniMODUL-167
The miniMODUL-167 is intended for use in memory-intensive applications and in driving a CAN-bus interface. The size of a credit card (85 by 55 mm.), the standard board is populated with the Infineon C167CR controller and runs at a 20 MHz clock speed, delivering instruction cycles in 100 ns. [mehr]
DIPmodul-164
This tiny yet highly cost-effective insert-ready System on Module is based on the Infineon C164CI 16-bit microcontroller in MQFP-80 packaging. [mehr]
phyCORE®-XC167
The phyCORE-XC167 belongs to PHYTEC´s phyCORE System on Module family and supports the XC167CI controller from Infineon in TQFP-144-50 housing [mehr]
phyCORE®-XC161
The phyCORE-XC161 belongs to PHYTEC´s phyCORE System on Module family and supports the XC161CJ controller from Infineon in TQFP-144-50 housing. [mehr]
phyCORE®-167
The phyCORE-167/ST10F168 supports high-end 16-bit controllers from Infineon featuring on-chip CAN and Flash. [mehr]
phyCORE-i.MX27 Rapid Development Kit (WinCE)
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
Includes phyCORE-MPC565 SOM with 2 (8) MB SRAM and 2 (12) MB Flash mounted on Carrier Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, AC/DC adapter, serial & parallel cables and access to schematics [mehr]
phyCORE-MPC555 Rapid Development Kit
Includes phyCORE-MPC555 SOM with 1 (4) MB SRAM and 0.5 (4) MB Flash mounted on Carrier Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, AC/DC adapter, serial & parallel cables and access to schematics.
Uniquely fun, easy, low-risk evaluation and application development platform forthe STM32 ARM Cortex-M3 core-based microcontrollers [mehr]
REva STR71x Starter Kit
Complete, cost-effective starter kit for STR711 and STR712 devices [mehr]
REva STR730 Starter Kit
Complete, cost-effective starter kit for STR730 devices [mehr]
REva STR750 Starter Kit
Complete, cost-effective starter kit for STR750 devices [mehr]
REva STR9 Starter Kit
Complete, cost-effective starter kit for STR9 [mehr]
STM32 Primer Professional
The original, fun, easy, low-risk evaluation and application developmentplatform for the STM32 ARM Cortex-M3 core-based microcontrollers [mehr]
REva STM32 Starter Kit
Complete, cost-effective starter kit for STM32 [mehr]
Dev Evaluation Kit H8S/2166
The 3DK board consists of an H8S-2166 microcontroller (MCU) mounted on a circuit board with 8 independent LEDs connected to an I/O port to allow simple visual output from the MCU [mehr]
Dev Evaluation Kit H8S/2218
The 3DK board consists of an H8S-2218U microcontroller (MCU) mounted on to a circuit board with 8 independent LEDs connected to an I/O port to allow simple visual output from the MCU. Two switches [mehr]
Dev Evaluation Kit H8/38076
The 3DK board consists of an H8-38076 microcontroller (MCU) mounted on to a circuit board with 8 independent LEDs connected to an I/O port to allow simple visual output from the MCU. Two switches allow [mehr]
Dev Evaluation Kit H8/38086R
The 3DK board consists of an H8/38086R microcontroller (MCU) mounted on to a circuit board with 8 independent LEDs connected to an I/O port to allow simple visual output from the MCU. Two switches [mehr]
Dev Evaluation Kit H8S/2239
The EDK2239 is an improved and rationalized low-cost evaluation board for the H8S/2239 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers and the functionality of our complimentary range of development tools. [mehr]
Dev Evaluation Kit H8S/2329
The EDK2329 is an improved and rationalized low-cost evaluation board for theH8S/2329 microcontroller. The kit provides a way for prospective developers toexperience the performance of Renesas microcontrollers [mehr]
Dev Evaluation Kit H8S/2378
The EDK2378 is an improved and rationalized low-cost evaluation board for the H8S/2378 microcontroller. [mehr]
Starter Kit for M16C/26A
The Renesas Starter Kit for M16C/26A is intended as a user-friendly introductory and evaluation tool for the M16C/26A microcontroller. The board also provides a useful platform for evaluating the Renesas [mehr]
Starter Kit for M16C/29
The Renesas Starter Kit for M16C/29 is intended as a user-friendly introductory and evaluation tool for the M16C/29 microcontroller. [mehr]
Starter Kit for SH7086
The Renesas Starter Kit for SH7086 is intended as a user-friendly introductory and evaluation tool for the SH7086 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Starter Kit for SH7124
The Renesas Starter Kit for SH7124 is intended as a user-friendlyintroductory and evaluation tool for the SH7124 microcontroller. The board alsoprovides a useful platform for evaluating the Renesas suite of development toolsfor coding and debugging, using High-performance Embedded Workshop as well asprogramming the device using E8 emulator and/or Flash DevelopmentToolkit. [mehr]
Evaluation Development Kit for H8/38024
The US38024-BAG1 is an improved and rationalized low-cost evaluation board for the H8/38024 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers and the functionality of our complimentary range of development tools. The US38024-BAG1can be used to introduce the H8/38024 to new users and assess its capabilities. [mehr]
Starter Kit for H8SX/1582
The Renesas Starter Kit for H8SX/1582 is intended as a user-friendly introductory and evaluation tool for the H8SX/1582 microcontroller. [mehr]
Starter Kit for H8SX/1664
The Renesas Starter Kit for H8SX/1664 is intended as a user-friendly introductory and evaluation tool for the H8SX/1664 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Renesas Starter Kit for R8C/23
The Renesas Starter Kit for R8C/23 is intended as a user-friendly introductory and evaluation tool for the R8C/23 microcontroller. [mehr]
Evaluation Development Kit for H8S/2398
The EDK2398 is an improved and rationalized low-cost evaluation board for theH8S/2398 microcontroller. The kit provides a way for prospective developers toexperience the performance of Renesas microcontrollers [mehr]
Starter Kit for R8C/27
The Renesas Starter Kit for R8C/27 is intended as a user-friendly introductory and evaluation tool for the R8C/27 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Evaluation Development Kit for H8S/2676
The EDK2676 is an improved and rationalized low-cost evaluation board for theH8S/2676 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers [mehr]
Evaluation Development Kit for H8S/2638
The EDK2638 is an improved and rationalized low-cost evaluation board for theH8S/2638 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers [mehr]
Evaluation Development Kit for H8/3069
The EDK3069 is an improved and rationalized low-cost evaluation board for theH8/3069 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers [mehr]
Evaluation Development Kit for H8/3687
The EDK3687 is an improved and rationalized low-cost evaluation board for theH8/3687 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers and the functionality of our complimentary range of development tools. [mehr]
Evaluation Development Kit for SH7145
The EDK7145 is an improved and rationalized low-cost evaluation board for theSH7145 microcontroller. The kit provides a way for prospective developers to experience the performance of Renesas microcontrollers [mehr]
Starter Kit for M32C/87
The Renesas Starter Kit for M32C/87 is intended as a user-friendly introductory and evaluation tool for the M32C/87 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Starter Kit for H8S/2215R
The Renesas Starter Kit for H8S/2215R is intended as a user-friendly introductory and evaluation tool for the H8S/2215R microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Starter Kit for R8C/1B
The Renesas Starter Kit for R8C/1B is intended as a user-friendly introductory and evaluation tool for the R8C/1B microcontroller. The board also provides a useful platform for evaluating the Renesas suite [mehr]
Starter Kit for R8C/25
The Renesas Starter Kit for R8C/25 is intended as a user-friendly introductory and evaluation tool for the R8C/25 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8 emulator and/or Flash Development Toolkit. [mehr]
Starter Kit for M16C/62P
The Renesas Starter Kit for M16C/62P is intended as a user-friendly introductory and evaluation tool for the M16C/62P microcontroller. [mehr]
Starter Kit for M16C/6NK
The Renesas Starter Kit for M16C/6NK is intended as a user-friendly introductory and evaluation tool for the M16C/6NK microcontroller. [mehr]
SKP38602 Starter Kit Plus for H8/38602
The H8/38602 Starter Kit Plus (SKP) is a complete system for evaluating MCU performance for the Renesas H8 Super Low Power family of microcontrollers. This kit consists of an MBH838602 board and an E8 on-chip debugging emulator and also includes sample code, documentation and tutorial to jump start development. [mehr]
Dev Compact Emulator M32C/87
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a significantly reduced size, compared with conventional emulator systems. This product package includes not only an emulator main unit and connectors but also the limited cross tools, so you can program and debug your applications as soon as you open the package. [mehr]
Evaluation Development Kit for H8S/2612
The EDK2612 is an improved and rationalized low-cost evaluation board for theH8S/2612 microcontroller. The kit provides a way for prospective developers toexperience the performance of Renesas microcontrollers and the functionalityof our complimentary range of development tools. The EDK2612 can be used tointroduce the H8S/2612 to new users, assess its capabilities. [mehr]
Starter Kit for H8/36079
The Renesas Starter Kit for H8/36079 is intended as a user-friendly introductory and evaluation tool for the H8/36079 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E8a emulator and/or Flash Development Toolkit. [mehr]
Starter Kit for H8SX/1622
The Renesas Starter Kit for H8SX/1622 is intended as a user-friendly introductory and evaluation tool for the H8SX/1622 microcontroller. The board also provides a useful platform for evaluating the Renesas suite of development tools for coding and debugging, using High-performance Embedded Workshop as well as programming the device using E10A emulator. [mehr]
Renesas Starter Kit for H8/38099
The Renesas Starter Kit for H8/38099 is intended as a user-friendly introductoryand evaluation tool for the H8/38099 microcontroller. [mehr]
Renesas Starter Kit for H8S/2215R
The Renesas Starter Kit for H8S/2215R is intended as a user-friendlyintroductory and evaluation tool for the H8S/2215R microcontroller. [mehr]
