PHYTEC develops and manufactures OEMable System On Modules (SOMs) and related hardware in support of ARM, XScale, Blackfin, PowerPC, ColdFire, Atom/x86, and other devices. Our insert-ready SOMs can be customized at low volumes. Linux and Windows Embedded Board Support Packages are available for applicable SOMs. PHYTEC also offers design services, and distributes CAN products from PEAK System and SYSTEC. Our solutions enable end users to shorten time-to-market, reduce development costs and avoid substantial design risk.
PEAK PCAN-PC/104plus CAN Adapter
Connectivity solution for PC/104plus systems to up to two CAN networks. Up to 4 cards can be operated in the same system with flexible configuration by means of jumpers. Includes PCANview CAN monitor, drivers and source code demos for Windows and Linux.
Insert card for PCI Express bus systems adding CAN connectivity in a plug and play fashion. Available with single or dual CAN channels as well as with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
PCI insert card adding CAN connectivity to computers in a plug and play fashion. Available with single or dual CAN channels as well as with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
The GPIO offers quick and easy demonstration of many features of the microcontroller populating various phyCORE Single Board Computers that mount on the Carrier Board. Multiple GPIO devices enable input and output testing.
The PCAN-Trace is a dedicated data logger for up to 9,999,000 CAN messages. It enables CAN messages to be quickly recorded, saved and even played back on the CAN bus. Choice of linear or ring buffer and adjustable message filter.
CAN-REport is a CAN-bus monitor and analyzing tool that puts you in the position to observe, record and evaluate the CAN communication on a logical level. [mehr]
PEAK-PCAN-MicroMod Baseboards
Ready-to-go CAN/CANopen I/O box in metal casing (51*60*20 mm) with snap-in terminal connector suitable for a wide range of industrial control applications. Firmware included in the MicroMod CPU module handles all input/output traffic and CAN communication.
Sophisticated CAN software system for designing and operating distributed networks. Communication is based on a Windows ring-0 driver (VxD/SYS) and allows for interrupt-driven receipt of CAN messages including time stamp. Includes only unlimited driver licenses as well as PCAN Explorer and PCAN Trace.
The NEW PCAN-Explorer 4 is a general purpose CAN monitor for overseeing the data traffic on a network. The integrated data logger can receive and record all or selected messages from the CAN bus. Additional plug-ins allow graphical representation of CAN information, import of databases and printing of strip charts. Windows Vista compatible.
Flexible CAN software system for designing and operating distributed networks. Communication is based on a Windows ring-0 driver (VxD/SYS) and allows for interrupt-driven receipt of CAN messages including time stamp. Includes only 5 driver licenses.
Includes phyCORE-MPC555 SOM with 1 (4) MB SRAM and 0.5 (4) MB Flash mounted on Carrier Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, AC/DC adapter, serial & parallel cables and access to schematics.
Includes phyCORE-MPC565 SOM with 2 (8) MB SRAM and 2 (12) MB Flash mounted on Carrier Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, AC/DC adapter, serial & parallel cables and access to schematics [mehr]
phyCORE-MPC5200B-tiny Rapid Development Kit
Includes phyCORE-MPC5200B-tiny module and Carrier Board, PHYTEC Linux Tool CD, AC/DC adapter, serial cable and access to schematics.
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
The phyCORE-167/ST10F168 supports high-end 16-bit controllers from Infineon featuring on-chip CAN and Flash. [mehr]
phyCORE®-XC161
The phyCORE-XC161 belongs to PHYTEC´s phyCORE System on Module family and supports the XC161CJ controller from Infineon in TQFP-144-50 housing. [mehr]
phyCORE®-XC167
The phyCORE-XC167 belongs to PHYTEC´s phyCORE System on Module family and supports the XC167CI controller from Infineon in TQFP-144-50 housing [mehr]
DIPmodul-164
This tiny yet highly cost-effective insert-ready System on Module is based on the Infineon C164CI 16-bit microcontroller in MQFP-80 packaging. [mehr]
miniMODUL-167
The miniMODUL-167 is intended for use in memory-intensive applications and in driving a CAN-bus interface. The size of a credit card (85 by 55 mm.), the standard board is populated with the Infineon C167CR controller and runs at a 20 MHz clock speed, delivering instruction cycles in 100 ns. [mehr]
phyCORE®-i.MX27
The phyCORE-i.MX27 is a subminiature (84 x 60 mm) insert-ready System on Module populated with the Freescale i.MX27 microcontroller. [mehr]
phyCORE®-ARM11/i.MX31
The phyCORE-i.MX31 is an insert-ready System on Module (SOM) subassembly in miniature dimensions, populated with the Freescale i.MX31. [mehr]
phyCORE®-ARM9/LPC3250
The phyCORE-LPC3250 is an ARM-9 based, small form factor, OEMable module populated with the NXP LPC3250. State-of-the-art power management, Vector Floating Point Unit (VFP), and rich peripherals such as USB OTG, Ethernet, and integrated LCD controller make this module the ideal candidate for embedded applications requiring high performance and low power consumption. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - WinCE
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - IAR
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - Keil
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [mehr]
phyCORE®-ARM9/LPC3250 Rapid Development Kit
Includes phyCORE-LPC3250 SOM with 64 MB SDRAM and 64 MB Flash on phyCORE-LPC3250 Carrier Board, Bare PCB Expansion Board, PHYTEC Kit CD, cables, AC adapter, and access to schematics.
Includes phyCORE®-MPC5554 module and Carrier Board, Bare PCB Expansion Board, P&E Micro systems MPC55xx USB-JTAG Debugging Interface, P&E Micro PKGPPC Nexus Starter Edition software, PHYTEC Tool CD for Freescale MPC5554, AC/DC adapter, serial cable and access to schematics.
phyCORE®-XScale/PXA270 Rapid Development Kit w/ LCD
Includes phyCORE®-PXA270 SOM with 64 MB SDRAM and 32 MB Flash mounted on Carrier Board with Expansion Board, 8.4" Sharp LCD/Touch Panel, Bare PCB Expansion Board, JTAG Adapter, null modem cable, parallel cable, cross-over ethernet cable, power adapter, access to schematics, pre-installed Linux OS or Windows Embedded CE 6.0 demo image and PHYTEC Spectrum CD including SBC hardware manual, evaluation compiler, software demos and Controller User´s Manual
phyCORE®-ARM7/LPC2294 Rapid Development Kit + Keil
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, Keil ULink2, PHYTEC Spectrum CD, Keil DK-ARM Evaluation Software, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.Configuration: Keil [mehr]
phyCORE®-ARM11/i.MX31 System on Module
The phyCORE-i.MX31 is an ARM®-11 based System on Module populated with the Freescale® i.MX31: a high performance multimedia applications processor. Graphics acceleration, state-of-the-art power management, Floating Point Unit, and rich peripherals such as Ethernet, USB and integrated LCD controller make this module the ideal candidate for computer-bound applications. Configuration: 128 MB DDR RAM, 32 MB NOR Flash, 64 MB NAND Flash, 512 kB SRAM, 32 kBit EEPROM, Ethernet, RTC, USB [mehr]
phyCORE®-MPC565 System on Module
Based on the Freescale MPC565 microcontroller, this module features Ethernet crossed with Triple On-chip CAN & 64-bit FPU on a credit card size SOM with Burst Flash and SRAM especially suited for calculation-intensive embedded applications. Configuration: 56 MHz, 2 MB Burst-SRAM, 2 MB asynch. external Flash, 1 MB on-chip Flash, 4 KB I2C-EEPROM, CS8900A Ethernet, 3x CAN, 1x J1850, 1x BDM/Nexus, ind temp range, PLD V2 [mehr]
phyCORE®-MPC555 System on Module
32-bit PowerPC module in sub-mini dimensions with dual 2.0B CAN, FPU, SPI, dual UART, QADC running at 40 MHz for advanced automotive, avionics and industrial control applications. Configuration: 1 MB RAM, 512 KB Flash, 4 KB EEPROM, ETR [mehr]
phyCORE®-MPC5200B I/O System on Module
The phyCORE-MPC5200B I/O is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 32 MB Flash, 128 MB SDRAM, 2 MB SRAM, CAN, Ethernet, FPGA, MMU. [mehr]
phyCORE®- MPC5200B tiny System on Module
The phyCORE-MPC5200B tiny is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 16 MB Flash, 128 MB DDR-SDAM, CAN, Ethernet, USB 1.1 host, MMU [mehr]
phyCORE®-MPC5554 System on Module
The Freescale MPC5554 PowerPC microcontroller embodies the continued development of the successful MPC500 family. Configuration: MPC5554 (132 MHz), 2 MB SRAM, 2 MB Flash, CAN, Ethernet, FPGA [mehr]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash. Configuration: MCF5485, 200 MHz, 64 MB DDR SRAM, 32 MB Flash, Ethernet, 2.0 USB [mehr]
phyCORE®-ARM9/LPC3180 System on Module
This 32-bit MCU high-performance, low power LCP3180 ARM926EJ-S device from NXP Semiconductors (founded by Philips) provides a vector floating-point co-processor and integrated USB OTG, as well as the ability to operate in ultra-low-power mode down to 0.9V. Configuration:208 MHz, 32 MB SDRAM,32 MB Nand Flash, 32 KB EEPROM, USB OTG, JTAG interface [mehr]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash.
phyCORE®-ARM9/LPC3180 Rapid Development Kit - LINUX
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + LINUX [mehr]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - IAR
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + IAR [mehr]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - Keil
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, Bare PCB Expansion Board, Keil Ulink2, Keil RealView MDK-ARM Evaluation Software, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + KEIL [mehr]
phyCORE®-i.MX31 Rapid Development Kit - Linux
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics. Configuration: Linux [mehr]
phyCORE®-i.MX31 Rapid Development Kit - Windows Embedded CE
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics.Configuration: WinCE [mehr]
phyCORE®-BF537 System on Module
Insert-ready SOM supporting Blackfin DSP/MCU with Ethernet, USB, CAN and optional WiLAN, FPGA. Configuration: 500 MHz, 128 MB SDRAM, 4 MB Flash, 32 KB EEPROM, USB, Ethernet, CAN, JTAG interface [mehr]
phyCORE®- BF537 Rapid Development Kit
Includes phyCORE®-BF537 SBC with 128 MB SDRAM and 4 MB Flash mounted on Blackfin Carrier Board, Bare PCD Expansion Board, PHYTEC Spectrum CD, ADI CrossView CD with VisualDSP++ IDDE, AC adapter, cables and access to schematics.
Includes phyCORE®-MCF5485 SBC with 64 MB DDR SDRAM and 32 MB Flash mounted on Carrier Board, Bare PCB Expansion Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, P&E BDM adapter, AC/DC adapter, serial cable and access to schematics. [mehr]
phyCORE® AT91M55800A Rapid Development Kit
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
phyCORE®-ARM7/LPC2294 Rapid Development Kit - Basic
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.
phyCORE®-XScale/PXA255 Basic Rapid Development Kit
The phyCORE System on Module (SOM) is designed to plug into a PHYTEC Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not [mehr]
phyCORE® AT91M55800A Rapid Development Kit
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
Based on the NXP Semiconductors (founded by Philips) ARM7TDMI-S Processor Core, this subminiature System on Module offers 4 CAN interfaces, 10/100 MBits Ethernet, etc. running at 60 MHz CPU speed
SOM module based on Atmel 32-bit ARM7 RISC microcontroller with Ethernet, 4 UARTs, 8-ch ADC, 2-ch DAC and JTAG offering up to 16 MB Flash and up to 8 MB SRAM.
CAN-to-Ethernet gateway in 70x100x61 mm dimensions connects multiple CAN networks and PCs via Ethernet at up to 1 Mbit/s CAN and 10Mbit/s Ethernet transmission speeds.
This new PC card style (type II) CAN connectivity is an ideal solution for mobile computers. Also available with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
The PCAN-LIN interface enables users to communicate and exchange data over CAN, LIN and serial interface. Included configuration software allows setup of different operational modes. Supplied in plastic casing.
Connects your computer to up to 8 CAN channels via high speed USB2.0 Device with up to 480Mbps. Ideal for servicing and maintenance tasks of CAN-bus systems.
Handheld size CAN connectivity solution for PC or laptop using a standard USB port enabling easy plug&play installation. This new dual channel CAN version allows control and monitoring of two independent CAN systems from a single computer. Supports precise CAN message time stamps. Also available with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos. [mehr]
SYS TEC USB-CANmodul2 (dual CAN)
Handheld size CAN connectivity solution for PC or laptop using a standard USB port enabling easy plug&play installation. This new dual channel CAN version allows control and monitoring of two independent CAN systems from a single computer. Supports precise CAN message time stamps. Also available with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
The smallest CAN connectivity solution for PC or laptop on the market using a standard USB port enabling easy plug&play installation. This new version also provide precise CAN message time stamps. Also available with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
The smallest CAN connectivity solution for PC or laptop on the market using a standard USB port enabling easy plug&play installation. This new version also provide precise CAN message time stamps. Also available with optical isolation of CAN signals. Includes PCANview CAN monitor, drivers and source code demos.
The CANopen-Chip F40 is a tiny yet highly cost-effective CANopen Slave I/O node based on the Fujitsu MB90F40xxx microcontroller. The integrated firmware allows I/O data processing according to CiA DS301 and DSP 401 standards. Various baud rate, I/O and node ID configuration via DIP switches.
This optically isolated USB-to-CAN converter (optically isolated), includes PCANview monitor software . This adapter makes it possible to connect any laptop computer or PC with a USB connector to a CAN [mehr]
PCAN-USB Adapter
This non-optically isolated USB-to-CAN converter, includes PCANview monitor software. This adapter makes it possible to connect any laptop computer or PC with a USB connector to a CAN bus. Galvanic isolation [mehr]
