Microchip Technology Inc. ist ein führender Anbieter von Mikrocontrollern und analogen Halbleitern und bietet risikoarme Produktentwicklung, niedrige Gesamt-Systemkosten und schnellere Markteinführung für tausende von unterschiedlichsten Kundenanwendungen weltweit. Microchip bietet hervorragende technische Unterstützung und zuverlässige Lieferbarkeit und Qualität.
Der Firmen-Hauptsitz von Microchip Technology Inc. ist in Chandler, Arizona.
PICDEM Inductive Touch Development Kit
The PICDEM Inductive Touch Development Kit is an evaluation and development platform for Microchips Inductive Touch Technology. Factory programmed firmware provides immediate access to all the boards features through the use of the MPLAB mTouch plug-in. Using a PICkit Serial analyzer to communicate with the PC, it allows the user to analyze application critical information in real-time as it relates to sensor behavior [mehr]
mTouch Cap Touch Evaluation Kit
The mTouch Capacitive Evaluation Kit provides a simple platform for developing a variety of capacitive touch sense applications using PIC16F or PIC24F microcontrollers. The Diagnostic Tool provided allows the user to analyze application-critical information in real-time as it relates to touch sensor behavior. [mehr]
PICDEM HPC Explorer Board
The PICDEM HPC Explorer Board replaces the PIC18F8720 64/80L TQFP Demo Board (DM183020). This low-cost demo board is ideal for users who want to evaluate the performance of Microchip high-end 8-bit microcontrollers of the PIC18F series. The board features a PIC18F8722 microcontroller, which is a super set of the entire 64-pin and 80-pin PIC18F general purpose family. An unpopulated Plug-In Module is included for use with the processor of your choice. Just snap off the attached board, populate the board, and plug it in [mehr]
MPLAB Starter Kit for PIC18F MCU
The MPLAB Starter Kit for PIC18F MCU contains everything needed to experience the high performance and versatility of the PIC18F microcontroller family. It includes an on-board debugger/programming capability as well as USB communication, a capacitive touch pad, potentiometer, acceleration sensor, MicroSD memory card, and an OLED display. The board can function as a USB mouse, joystick or mass-storage device (thumb drive) all using the on-board capacitive touch sense pads. [mehr]
F1 Evaluation Platform
The F1 Evaluation Platform is a demonstration/development tool for Enhanced Mid-range PIC microcontrollers (PIC12F1xxx/PIC16F1xxx). Populated with a PIC16LF1937 featuring XLP technology, this platform consists of a 44-pin development board with prototyping space, 3V LCD glass, support for the Motor Control add-on (coming soon), and support for PICkit 3 & PICkit Serial. This kit provides a platform for general purpose development, and includes demonstrations focusing on low Power, LCD, and motor control. [mehr]
PICDEM Touch Sense 2
The PICDEM Touch Sense 2 board features the new peripheral on PIC24F parts called Charge Time Measurement Unit (CTMU). The board uses a PIC24F256GB110 device to implement a slider, 20-button matrixed keyboard and a wheel with center button and a soft power button. The board also works with the mTouch Diagnostic Tool, which is a Graphic User Interface tool use to develop, debug and diagnose the Capacitive Touch application. The GUI works on USB using the supplied USB cable. This product is also part of the Human Interface Program. [mehr]
Low Pin Count USB Development Kit
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchips PIC18F14K50 and PIC18F13K50 20-pin USB microcontrollers. The all-inclusive kit contains the hardware, software, and code examples necessary to bring your next USB design from concept to prototype. Created with the USB novice in mind, the kit includes Getting Started with Microchips Low Pin Count USB Solutions, a self-directed course and lab material designed to ease the learning curve associated with adding USB connectivity to embedded systems [mehr]
PICDEM Touch Sense 1 Development Kit
The PICDEM™ Touch Sense 1 Development Board and Diagnostic Tool provides a platform to introduce users to Microchips Capacitive mTouch™ Sensing Solutions.This board is a completely sealed application example using three different touch sensor configurations in the form of a Directional pad, Keypad, and Slider section.A factory programmed firmware application provides the user immediate access to all of the boards features through the use of the accompanying Windows(R) based Diagnostic Tool and PICkit Serial Analyzer.The Diagnostic Tool provides the user a platform to analyze application critical information in real-time as it relates to touch sensor behavior.This product is also part of the Human Interface Program. [mehr]
PIC18F4xK20 Starter Kit
The PIC18F4XK20 Starter Kit is a demonstration and development platformfor Microchips K20 series microcontrollers.The board provides aplatform to highlight this new familys benchmark for lower powerconsumption, low-cost and high-performance operation.It includes thedevelopment board, PICkit 2 Development Programmer/Debugger, andprogramming lessons. [mehr]
PICDEM Lab Development Kit
The PICDEM Lab Development Board is designed to providea comprehensive development and learning platform for virtually all ofMicrochips Flash-based 6-, 8-, 14-, 18-, and 20-pin, 8-bit PICMicrocontrollers.Geared toward first-time PIC Microcontroller usersand University students, the PICDEM Lab Development Board is suppliedwith five of our most popular 8-bit PIC Microcontrollers and a host ofdiscrete components used to create a number of commonly used circuits. Expansion headers provide complete access/connectivity to all pins onthe connected PIC Microcontrollers and all mounted components [mehr]
PICDEM Full Speed USB
ThePICDEM™ FS-USB is a demonstration and evaluation board for thePIC18F4550 family of Flash microcontrollers with full speed USB 2.0interface. The board contains a PIC18F4550 microcontroller in a 44-pinTQFP package, representing the superset of the entire family of devicesoffering the following features:
The PICDEM.net™ 2 Development Board (DM163024) is an Internet/Ethernet development board supporting both the popular ENC28J60 Ethernet Controller and the single-chip Ethernet microcontroller family, the PIC18F97J60. With this board, using Microchip’s free TCP/IP stack, a web server can be developed showcasing the capability to remote monitor and control embedded applications over the Internet. [mehr]
PICDEM CAN-LIN 3 Demonstration Board_duplicate
Microchip offers two similar PICDEM CAN-LIN demonstration boards tosupport different PICmicro® devices. All demonstrate the main featuresof the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [mehr]
PICDEM CAN-LIN 2 Demonstration Board
Microchip offers two similar PICDEM CAN-LIN demonstration boards to support different PICmicro® devices. All demonstrate the main features of the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [mehr]
MPLAB ICD 3 Evaluation Kit With Explorer 16
The MPLAB ICD 3 with Explorer 16 Kit is a complete set of tools for applicationdevelopment using Microchip PIC24F, PIC24H, and dsPIC33 16-bit MCUs. [mehr]
MPLAB ICD 3 Evaluation Kit
This kit includes a MPLAB ICD 3 Debugger, a PICDEM 2 Plus (DM163022), and a 9Vuniversal power supply. [mehr]
PICDEM System Management Kit
The PICDEM™ System Management Kit is a demonstration and training tool for system integration and the design of a variety of applications. PIC® microcontrollers provide powerful integrated peripherals, ideally suited for such integration tasks. System integration refers to the consolidation of multiple systems within a unified design. [mehr]
PICkit Serial Analyzer
The PICkit Serial Analyzer is a low-cost USB-based tool used to direct communication between a PC and an external serial device. The kit comes complete with hardware (supporting I2C™, SMBus, SPI and USART protocols), an easy-to-use GUI (to configure and display communications) and a target demonstration board for out-of-the-box functionality. For more advanced users a DLL is also included as an API for developing custom softwar [mehr]
PIC18 Development Kit
The PIC18 Development Kit is a complete bundle of the essential development tools needed to get started with your next PIC18 application. The kit includes a PIC18 Explorer Board, PICkit 3 Debugger/Programmer, USB cable, and a 9V universal power supply. The PIC18 Explorer Board includes both the PIC18F8722 and PIC18F87J11 microcontrollers and supports dozens of the general purpose PIC18 families using various processor Plug-in Modules (PIMs). [mehr]
Low Power Solutions Demonstration Board
The Low Power Solutions Demonstration board provides designers a convenient and fun way to explore PICmicro® nanoWatt features within a functional ultrasonic range-finder application. It features the PIC18F4620, Microchip Technology´s latest power managed device. [mehr]
Mechatronics Demonstration Kit
The PICDEM™ Mechatronics demonstration board is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system. Learn how to use PIC® microcontrollers to enhance or replace a mechanical design. [mehr]
PICDEM MC LV Development Board
The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. The board is capable of controlling motors rated up to 48V and 2.2 Amps. [mehr]
PICDEM LCD 2 Demonstration Board
The PICDEM LCD 2 Demonstration Board (DM163030) shows the main features of Microchip’s 28, 40, 64 and 80-pin LCD Flash PIC microcontrollers including the LCD voltage booster and contrast controller. It is populated with the PIC18F85J90. [mehr]
PIC18 Explorer Board
This low-cost demo board is for evaluation of our PIC18 MCU families. The PIC18 is our highest performance 8-bit architecture and has three different families: standard PIC18, PIC18 J-series and PIC18 K-series. This single development board supports dozens of the general purpose PIC18 families using various processor Plug-In Modules (PIMs). [mehr]
PICkit 1 Flash Starter Kit
The PICkit™ 1 Flash Starter Kit is a low-cost development kit with an easy-to-use interface for programming Microchip’s 8-/14-pin Flash family of microcontrollers. [mehr]
PICDEM 2 Plus
The PICDEM 2 Plus is a simple board that demonstrates the capabilities of many of the 18-, 28- and 40-pin PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, with an in-circuit emulator (e.g., MPLAB® ICE or MPLAB® REAL ICE™) or with an in-circuit debugger, MPLAB ICD 2. [mehr]
PICDEM 4 Demonstration Board
The PICDEM 4 is a demonstration and evaluation board for the 8-pin, 14-pin, and 18-pin general purpose family of products with power management features. [mehr]
dsPICDEM 2 Development Board
The dsPICDEM™ 2 Development Board is a development and evaluation tool that helps create embedded applications using dsPIC30F Digital Signal Controllers. [mehr]
Explorer 16 Development Board
The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of Microchip´s new PIC24 Microcontroller, the dsPIC33 Digital Signal Controller (DSC) families, and the new 32-bit PIC32MX devices. [mehr]
PIC32 Plug-In Module
This PIC32 Plug-In Module enables PIC32 development on the Explorer 16 development board (DM24000x) and supports the MPLAB REAL ICE Trace Kit (AC244006). An 80 MHz [mehr]
PIC32 Starter Kit
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, users quickly learn Microchip´s 32-bit family of microcontrollers and development tools. The kit includes everything needed to write, program, debug, and execute code on a high performance PIC32 microcontroller. [mehr]
PICkit 3 Debug Express
Microchip’s PICkit 3In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated intoeach chip with Flash memory to provide a low-cost hardwaredebugger and programmer. [mehr]
PICkit™ 2 Debug Express
PICkit 2 Debug Express allows in-circuit debugging on selected PICmicro microcontroller units (MCUs). In-circuit debugging allows the designer to run, examine, and modify the program while the PICmicro MCU is embedded in the hardware, thereby assisting the designer in debugging the firmware and hardware together. Debug Express interacts with MPLAB IDE software. Programs can be run, stopped, and single-stepped. One breakpoint can be set and the processor can be reset. Register contents can be examined and modified when the processor is stopped. Debug Express requires MPLAB IDE version 7.40 or later. [mehr]
PICkit 2 Development Programmer/Debugger
The PICkit™ 2 Development Programmer/Debugger (PG164120) is a low-cost development tool with an easy to use interface for programming and debugging Microchip’s Flash families of microcontrollers. The full featured Windows® programming interface supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit microcontrollers, and many Microchip Serial EEPROM products. [mehr]
MPLAB® REAL ICE™ In-Circuit Emulator
The MPLAB REAL ICE in-circuit emulator is an in-circuit emulator that is controlled by a PC running MPLAB IDE software on a Windows® platform. [mehr]
